Liste des articles
Copyright - [Précédente][Suivante] - Home

[SHEET001] : [E2130], "Transformateurs et inductances", F. BEAUCLAIR, J.-P. DELVINQUIER, J.-P. GROS, Techniques de l'Ingénieur, février 1998, 26 pages.
[SHEET002] : [D438], "Bobinages des machines tournantes", Pierre de FURSAC, Techniques de l'Ingénieur, décembre 1978.
[SHEET003] : M. HIERHOLZER, Th. LASKA, M. MUNZER, F. PFISCH, C. SCHAFFER, Th SCHMIDT, "3rd Generation of 1200V IGBT Modules - IGBT3", PCIM-Conference 1999, Nuremberg, 6 pages.
[SHEET004] : F. AUERBACH, J.G. BAUER M. GLANTSCHNIG, J. GöTTERT, M. HIERHOLZER, A. PORST, D. REZNIK, H.-J. SCHULZE, T. SCHüTZE, R. SPANKE, "6.5kV IGBT-Modules", PCIM-Conference 1999, Nuremberg, 4 pages.
[SHEET005] : R. BARTHELMEß, M. BEUERMANN, N. WINTER, "New Fast Diodes With Pressure Contact for GCT / IGBT Converters", PCIM-Conference 1999, Nuremberg.
[SHEET006] : D. WESTERHOLT,G. SCHMIDT, H.-J. SCHULZE, "Power Capability and Reliability of High Power Semiconductors", PCIM-Conference 1999, Nuremberg, 5 pages.
[SHEET007] : R. BAYERER, "IGBT Module Technology: State of the Art and Future Evolutions", PCIM-Conference 1999, Nuremberg, 2 pages.
[SHEET008] : M. BRUCKMANN, E. BAUDELOT, "Power semiconductors in transistorized converters. from the state-of-the-art to future trends", PCIM'99.
[SHEET009] : J.-M. PETER, "Power semiconductors, recent progresses, future evolutions and consequences", EPE'99 Laussanne, papxxx, pages.
[SHEET010] : J.-M. PETER, "Power semiconductors. New devices pursue lower on-resistance, higher voltage operation", PCIM Power Electronics Systems, January 1999, vol. 25, no. 1, pp. 24,26-32.
[SHEET011] : J.-M. PETER, A.K. WALLACE, "A development strategy for education in power electronics", EPE'95, Seville, Spain, 19-21 Sept 1995, vol. 3, pp.1008-1012.
[SHEET012] : J.-M. PETER, "Power system semiconductor compounds", Revue de l'Electricite et de l'Electronique, janvier 1996, no. 1, pp. 66-74.
[SHEET013] : J.-M. PETER, "Education in power electronics, the engineers point of view",  EPE Journal, March 1994, vol. 4, no. 1, pp. 47-49.
[SHEET014] : J.-M. PETER, "Short-circuit protection for IGBT", Revue Generale de l'Electricite, Fevier 1994, no. 2, pp. 32-39.
[SHEET015] : J.-M. PETER, "Intelligent power integrated circuits", Power Semiconductor Devices and Circuits, 26-27 Sept 1991, p.271-290 .
[SHEET016] : N. PINHAS, C. KORDON, "Du bon usage du facteur d'impact", sur le Web, 2000.
[SHEET017] : J.-M. PETER, "Components: reducing conduction losses (in power convertors)", EPE'91, Firenze, Italy, 3-6 Sept 1991, vol. 1, p.95-98.
[SHEET018] : J.-M. PETER, "How to reduce losses generated by fast recovery rectifiers",  Electronique de Puissance, April 1990, no. 38, pp. 10-17.
[SHEET019] : J.-M. PETER, "Power electronics components: from 1 watt to 1 megawatt", RGE 1989.
[SHEET020] : J.-M. PETER, "Analysis and optimisation of high frequency power rectification", PCI'88.
[SHEET021] : J.-M. PETER, "The range end. The power semiconductors of the nineties", Elektronik Praxis, September 1988) vol.23, no.9, p.34, 42-3.
[SHEET022] : J.-M. PETER, "Fast recovery rectifiers: how to reduce the switching losses", PCI'88.
[SHEET023] : J.-M. PETER, B. NADD, "Power electronics, from the discrete component to the function", EPE'87.
[SHEET024] : J.-M. PETER, B. NADD, "Power electronics, from the discrete component to the function",  Electronique de Puissance (June 1988) no.27, p.62-5.
[SHEET025] : J.-M. PETER, "Power components-good look at the function leads to cost reduction", Mesures (7 March 1988) vol.53, no.3, p.27-8, 30-3.
[SHEET026] : J.-M. PETER, I. RATES, "A new family of intelligent drivers", Informazione Elettronica (Oct. 1986) vol.14, no.10, p.53-7.
[SHEET027] : J.-M. PETER, "State of the art and development in the field of medium power devices",  Power Electronics and Applications ProceedingsBrussels, Belgium, 16-18 Oct 1985.
[SHEET028] : J.-M. PETER, I. RATES, "Self-protecting controllers (monolithic switch devices)", Toute l'Electronique (Feb. 1986) no.511, p.64-8.
[SHEET029] : J.-M. PETER, "Medium power semiconductors: state of developments and tends", Elektronik Industrie (1986) vol.17, no.1, p.62, 64-5, 68-9.
[SHEET030] : J.-M. PETER, "The fast rectifiers in the high frequency converters", IEE Colloquium on 'Recent Development in MOS Devices and Applications' (Digest No.71), 1986.
[SHEET031] : J.-M. PETER, I. RATES, "A new component family presents itself 'indestructible': power drivers-they can take punishment", Elektronik (4 April 1986) vol.35, no.7, p.71-4.
[SHEET032] : J.-M. PETER, "Needs evolve; the transistor diversifies", Electronique de Puissance (Sept. 1985) no.11, p.34-40.
[SHEET033] : J.-M. PETER, "High speed diodes: new parameters which are better suited to the user's needs",  Electronique de Puissance (June 1985) no.10, p.40-4.
[SHEET034] : J.-M. PETER, "Fast diodes in converter switching", Elektronik (22 March 1985) vol.34, no.6, p.75-80.
[SHEET035] : J.-M. PETER, "Switching behavior of fast diodes in the converter circuits",  PowerConversion International (Sept. 1984) vol.10, no.8, p.64, 66,68, 70-2.
[SHEET036] : J.-M. PETER, "Power semiconductor in today's and next future industrial environment", Electronique Techniques et Industries (Nov. 1983) no.2, p.27-36.
[SHEET037] : J. REDOUTEY, J.-M. PETER, "Fast diodes: conduction and blocking", Toute l'Electronique (Aug.-Sept. 1983) no.486, p.63-6.
[SHEET038] : J.-M. PETER, "For a better use of power transistors. Aid in switching and limitation of surges",
[SHEET039] : J.-M. PETER, "How to optimise a Darlington", Electronique Industrielle (15 Nov. 1981) no.24, p.47-52.
[SHEET040] : J.-M. PETER, N. COULTHARD, "Transistors versus thyristors for energy conversion ? ", Electronique Industrielle (1 April 1981) no.13, p.38-43.
[SHEET041] : J.-M. PETER, "Short-circuit protection of transistors", PowerConversion International (July-Aug. 1980) vol.6, no.4, p.27-32.
[SHEET042] : J.-M. PETER, "The utilisation of power transistors in electrical engineering", Bulletin Scientifique de l'Association des Ingenieurs Electriciens sortis de l'Institut Electrotechnique Montefiore (Jan.-March 1979), vol.92, no.1, p.19-27.
[SHEET043] : J.-M. PETER, "Protection of transistors against short circuits", Electronique & Applications Industrielles (15 March 1980) no.281, p.19-23.
[SHEET044] : J.-M. PETER, "Equipment reliability improvement using high power transistors", International Conference on Reliability and maintainability, Paris, France, 1978.
[SHEET045] : J.-M. PETER, "New prospectus in power transistor field", Radioindustria Elettronica - Televizione (May 1977) no.5, p.269-72.
[SHEET046] : J.-M. PETER, "For the control of power: the competition thyristors-transistors", Electronique & Applications Industrielles (1 March 1977) no.232, p.15-22.
[SHEET047] : J.-M. PETER, K. RISCHMULLER, "12 kW power switching", Elektrotechnik (16 Nov. 1976) vol.58, no.22, p.10-12.
[SHEET048] : J.-M. PETER, "A comparison between the transistor and the thyristor", Elektrotechnische Zeitschrift ETZ B (21 Jan. 1977) vol.29, no.2, p.41-8.
[SHEET049] : J.-M. PETER, "Overload protection of thyristors", Toute l'Electronique (Oct. 1976) no.414, p.45-52.
[SHEET050] : J.-M. PETER, "Design of a 40 kHz invertor using a fast thyristor", Electronique & Microelectronique Industrielles, 1 March 1976, no.216, p.45-50.
[SHEET051] : J.-M; PETER, "Protection of diodes and thyristors against overvoltage surges. II. Preventive measures", Toute l'Electronique (May 1975) no.399, p.47-51.
[SHEET052] : J.-M. PETER, "Protection of diodes and thyristors against overvoltage surges. I. Behaviour in transient conditions", Toute l'Electronique (March 1975) no.397, p.31-5.
[SHEET053] : J.-M. PETER, "The switching of triacs", Electronique & Microelectronique Industrielles, 15 Nov. 1973, no.180, p.57-64.
[SHEET054] : J.-M. PETER, "Series connection of thyristors", Revue Generale de l'Electricite (July-Aug. 1973) vol.82, no.7-8, pp. 453-61.
[SHEET055] : J. le PONNER, J.-M. PETER, "Thermal resistance and impedance of triacs",  Revue Generale de l'Electricite (Nov. 1972) vol.81, no.11, p.711-19.
[SHEET056] : J.-M. PETER, "di/dt limits of thyristors", Revue Generale de l'Electricite (June 1971) vol.80, no.6, p.503-8.
[SHEET057] : J.-M. PETER, "Progress with low-power thyristors", Toute l'Electronique (April 1971) vol.4, no.354, p.15-20
[SHEET058] : J.-M. PETER, "The limits of the di/dt thyristors and the modes of protection", Conference on power electronics, Budapest, Hungary, 25-27 Nov 1970.
[SHEET059] : J.-M. PETER, "Thyristor practice. I.", L'Antenna, Jan. 1971, vol. 43, no. 1, pp. 7-15.
[SHEET060] : L. LORENZ, "Key milestones for future power electronic systems", PCIM INTER '98 Japan.
[SHEET061] : P. GALBIATI, L. GRANDI, L. ZULLINO, C. CONTIERO, "LDMOS and VDMOS electrical characteristics in Multipower-BCD technology", Proceeding of the symposium on High Voltage and Smart Power ICs, may 7-11, 1989, L.A. The Electrotechnical Society, Incorporated.
[SHEET062] : L. LORENZ, "Power electronic systems", Powerconversion & Intelligent Motion, December 1998, vol. 24, no. 12, pp.10,12-21.
[SHEET063] : L. LORENZ, M. MAERZ, G. DEBOY, "Improved MOSFET. An important milestone toward a new power MOSFET generation", Powerconversion & Intelligent Motion, September 1998, vol. 24, no. 9, pp. 14-22.
[SHEET064] : L. LORENZ, "IGBT-state of the art and future development", PCIM'93 Europe, Nuremberg, Germany, pp. 240-622-624, 22-24 June 1993.
[SHEET065] : L. LORENZ, "Drive and protection concepts for IGBTs",  Revue Generale de l'Electricite, February 1994, no. 2, pp. 8-12.
[SHEET066] : M. FELDVOSS, H. AMANN, H. STUT, L. LORENZ, "The application of an IGBT in a power electronic circuit", PCIM '91 Europe.
[SHEET067] : B.K. BOSE, "Power electronics-recent advances and future perspective", Proceedings of IECON'93, pp. 14-16, vol. 1.
[SHEET068] : B.K. BOSE, "Power electronics - a technology review", Proceedings of the IEEE, August 1992, Vol. 80, No. 8, pp. 1303-1334.
[SHEET069] : B.K. BOSE, "Evolution of power semiconductor devices in the modern era and trend of converters", Journal of the Institution of Electronics and Telecommunication Engineers , January-February 1991, vol. 37, no. 1, pp. 3-16.
[SHEET070] : B.K. BOSE, "Trends in motion control technology", IETE Tech Rev, vol. 4, no. 8, August 1987, pp. 305-324.
[SHEET071] : C. BLAKE, D. KINZER, P. WOOD, "Synchronous rectifier versus Schottky diodes : a comparison of the losses of a synchronous rectifier versus the losses of a schottky diode rectifier", IEEE Applied Power Electronic Conference, 1994, pp.17-22.
[SHEET072] : G. MAJUMDAR, T. HIRAMOTO, T. SHIRASAWA, T. TANAKA, K. MOCHIZUKI, "Active surge voltage clamped 600 A IPM for high power application", Proceedings of ISPSD'95, 23-25 May 1995, pp.75-79.
[SHEET073] : K.G. RISCHMULLER, "Smartpower-from the state-of-the-art to future trends", 1998.
[SHEET074] : K.G. RISCHMULLER, "Monolithic smart power technology moves toward higher performance. II. Applications.", Powerconversion & Intelligent Motion, September 1992, vol. 18, no. 9, pp.53-5.
[SHEET075] : K.G. RISCHMULLER, "Monolithic smart power technology moves toward higher performance. I.", Powerconversion & Intelligent Motion, August 1992, vol. 18, no. 8, pp.6-10.
[SHEET076] : J.-M. PETER, "Thyristor practice. II. Dynamic study", L'Antenna, 1970.
[SHEET077] : J.-M. PETER, "Switching in power diodes and its effects. II. Use of fast diodes".
[SHEET078] : J.-M. PETER, "Switching in power diodes and its effects. Use of fast diodes".
[SHEET079] : S. MUKHERJEE, M. AMATO, I. WACYK, V. RUMENNIK, "LDMOS and LIGBT's in CMOS technology for Power Integrated Circuits."
[SHEET080] : K.G. RISCHMULLER, "Darlington, Bipmos, Cascode and REC - combined switches for improved converters", from "Transistors & Diodes in Power Processing", handbook Thomson.
[SHEET081] : J.-M. PETER, "High frequency power rectification", Powerconvers Intell Motion v 15 n 4 Apr 1989 6p
[SHEET082] : J.-M. PETER, B.C. NADD, "SMART POWER: A WAY TO IMPROVE DISCRETE COMPONENTS", Conference Record of the 1987 IEEE Industry Applications Society Annual Meeting, 18-23 Oct 1987.
[SHEET083] : J.-M. PETER, "Fast Diodes in Converter Circuits", Elektronik v 34 n 6 Mar 22 1985 p 75-80
[SHEET084] : J.-M. PETER, "STATE OF THE ART AND DEVELOPMENT IN THE FIELD OF MEDIUM POWER DEVICES", Powerconvers Intell Motion v 12 n 5 May 1986 p 14-15, 19-22.
[SHEET085] : J.-M. PETER, "HOW TO OPTIMIZE THE DARLINGTON SWITCH",  Proceedings of the 3rd Annual International PCI '81 Conference,  14-17 Sep 1981.
[SHEET086] : J.-M. PETER, "For a Better Application of Power Transistors: Aid in Commutation and Limitation of Overvoltages",  Electron Ind (Paris) n 47 Feb 15 1983 p 27-32.
[SHEET087] : J.-M. PETER, P. RAULT, "For energy conversion and motor control : Triacs or alternistors ?"
[SHEET088] : P. VOSS, K.H. MAIER, W. MECZYNSKI, H.W. BECKER, E. NORMAND, J.-L. WERT, D.I. OBERG, P.P. MAJEWSKI, "Irradiation experiments with high-voltage power devices as a possible means to predict failure rates due to cosmic rays", ISPSD'97.
[SHEET089] : Y. TAKAHASHI, K. YOSHIKAWA, T. KOGA, M. SOUTOME, T. TAKANO, H. KIRIHATA, Y. SEKI, "Ultra high-power 2.5 kV-1800 A power pack IGBT", ISPSD'97.
[SHEET090] : S. LINDER, S. KLAKA, M. FRECKER, E. CARROLL, H. ZELLER, "A New Range of Reverse Conducting Gate-Commutated Thyristors for High-Voltage Medium-Power Applications", EPE'97, vol. 1, pp. 117-124.
[SHEET091] : [D3102], "Physique des semi-conducteurs de puissance", P. LETURCQ, Techniques de l'Ingénieur, novembre 2000.
[SHEET092] : J.C.CREBIER, D. BUZON, M. BRUNELLO, J.P. FERRIEUX, "The three-phase interleaved boost rectifier: Study and comparison", EPE'99, 7-8 septembre 1999, 7 pages.
[SHEET093] : Y. RAINGEAUD, J. BAILLOU, P.RAULT, "Caractérisation fonctionnelle d'un thyristor GTO normally on utilisé comme cellule élémentaire ASDTM dans des applications de petite puissance",  EPF'98 Belfort, pp. 41-46, 1998.
[SHEET094] : P. RAULT, "Triacs for home appliances: present and future", PCIM'98 Forum Hong Kong, October 14-15, 1998.
[SHEET095] : J.D. VAN WYK, "Present and future trends in power electronic converters", EPE'95, Seville,  vol. 0, pp. 1-16.
[SHEET096] : W. FICHTNER, T. FEUDEL, K. KELLS, K. LILJA, J. LITSIOS, S. MULLER, N. STRECKER, "TCAD in power device design and optimization", IEDM'93.
[SHEET097] : L. TONG, T. CHING-HAN, K. SUNG-MO, "Efficient transient electrothermal simulation of CMOS VLSI circuits under electrical overstress"
[SHEET098] : D. FLORES, P. GODINON, J. FERNANDEZ, S. HIDALGO, J. REBOLLO, J. MILLAN, "The Shorted Anode Base Resistance Controlled Thyristor", 1993.
[SHEET099] : S. CUK, R.D. MIDDLEBROOK, "Coupled-inductor and other extensions of a new optimum topology switching DC to DC converter", IAS 1977, pp. 1110-1126.
[SHEET100] : R. Szczesny, K. IWAN, M. RONKOWSKI, "TCAD - a simulation package for power electronic systems", EPE'93, Brighton, pp. 1-6.
[SHEET101] : C. LECHEVALIER, L. GERBAUD, J.BIGEON, "A functional description for static converter structures design", EPE'97, Trondheim, vol. 2, pp. 794-799.
[SHEET102] : P. TIXADOR, "Supraconductivité : à l'aube d'une mutation technologique ?", RIGE, vol. 1, no. 3, 1998.
[SHEET103] : G. GATEAU, P. MAUSSION, T. MEYNARD, "Reconstructeur d'état en vue de la commande non linaire des convertisseurs multicellulaires série", RIGE, vol. 1, no. 3, 1998.
[SHEET104] : D. PINON, M. FADEL, T. MEYNARD, "Commande par mode glissant d'un hacheur à deux cellules : étude de l'installation des cycles limites", RIGE, vol. 1, no. 3, 1998.
[SHEET105] : F. LABRIQUE, D. GRENIER, H. BUYSE, "Etude par les récurrences du comportement en boucle fermée de systèmes électroniques de puissance", RIGE, vol. 1, no. 3, 1998.
[SHEET106] : H. GODFROID, A. MIRZARIAN, D. RAMUZ, "Machine synchrone pour procédés exigeants", RIGE, vol. 1, no. 1, 1998.
[SHEET107] : M. JUFER, "Electromécanique : évolution sous contrainte", RIGE, vol. 1, no. 1, 1998.
[SHEET108] : T. MEYNARD, "Performances dynamiques des convertisseurs multiniveaux", RIGE, vol. 1, no. 1, 1998.
[SHEET109] : M. PAVELLA, L. WEHENKEL, "Electric Power System Dynamic Security", RIGE, vol. 1, no. 1, 1998.
[SHEET110] : Y. MARECHAL, C. HERAULT, "Méthode de Galerkin sans maillage pour la simulation en électromagnétisme", RIGE, vol. 1, no. 1, 1998.
[SHEET111] : H. GAVRILLA, "Matériaux magnétiques doux", RIGE, vol. 1, no. 1, 1998.
[SHEET112] : D. Maksimovic, V. G. Oklobdzija, "Clocked CMOS adiabatic logic with single ac power supply," 21st European Solid-State Circuits Conference, ESSCIRC'95, 19-21 September 1995, Lille, France.
[SHEET113] : V.A.K. TEMPLE, "MOS Controled Thyristors - A new class of power devices", IEEE Transactions on Electron Devices, vol. ED-33, pp. 1609-1618, 1986
[SHEET114] : A. JAAFARI, A. SANDALI, D. BERGOGNE, "IGBT un nouveau composant de puissance", COMCONEL 90 Conference, Cairo, Dec. 1990.
[SHEET115] : H. ZELLER, "High Power Components. From the State-of-the-Art to Future Trends", PCIM 1998, may 26-28, 1998, NÜRNBERG, GERMANY.
[SHEET116] : L. LORENZ, K. KANELIS, "System solution for consumer drives", PCIM'98 Forum, Hong Kong, October 14 - 15, 1998
[SHEET117] : H. MATSUDA, "New Advanced Power Semiconductors. From the State-of-the-Art to Future Trends", PCIM 1998, may 26-28, 1998, NÜRNBERG, GERMANY.
[SHEET118] : [D3610][D3611][D3612], "Commande des machines à courant continu à vitesse variable", J.-P. LOUIS, B. MULTON, M. LAVABRE, Techniques de l'Ingénieur, décembre 1988.
[SHEET119] : G. COQUERY, R. LALLEMAND, D. WAGNER, M. PITON, H. BERG, K. SOMMER, "Reliability improvement of the soldering thermal fatigue with AlSiC technology on traction high power IGBT modules", EPE'99, paper 904, 1999.
[SHEET120] : A. HAMIDI, G. COQUERY, R. LALLEMAND, P. VALES, J.M. DORKEL, "Temperature measurements and thermal modeling of high power IGBT multichip modules for reliability investigations in traction applications", ESREF'98, Reliability of Power Devices, Copenhague, 9
[SHEET121] : G. COQUERY, R. LALLEMAND, D. WAGNER, P. GIBARD, "Reliability of the 400 A IGBT modules for traction converters. Contribution on the power thermal fatigue influence on life expancy", EPE'95, vol. 1, pp. 60-65.
[SHEET122] : A. HAMIDI, G. COQUERY, R. LALLEMAND, "Reliability of high power IGBT modules. Testing on thermal fatigue effects due to traction cycles", Proc. of EPE Conf., Trondheim, September 1997, vol. 3, pp. 3.118-3.123.
[SHEET123] : P. ALOISI, "La fatigue thermique", Electronique de Puissance, no. 24, 1987, pp. 31-39.
[SHEET124] : B.K. BOSE, "Evaluation of modern power semiconductor devices and future trends of converters", IEEE Transactions on Industry Applications, pp. 403-413, vol. 28, no. 2, March-April 1992.
[SHEET125] : A.E. SEGALL, J.R. HELLMANN, R.E. TRESSLER, "Thermal Shock Behaviour - Testing and Modelling", GRI, December 1992, 232 pages.
[SHEET126] : "SEB occurrence in a VIP: Influence of the epi-substrate junction", 1997.
[SHEET127] : P. ALOISI, "Thermal fatigue in power semiconductor", PCI'87.
[SHEET128] : P. ALOISI, "Evolution of Power Transistors", 1986.
[SHEET129] : "Characterization of silicon solar cells with interdigitated contacts".
[SHEET130] : "Progress in the measurement of multi-junction devices at ISE", 1991.
[SHEET131] : "SIERRA: a 3-D device simulator for reliability modeling", 1989.
[SHEET132] : "The effects of ionizing radiation on power-MOSFET termination structures", 1989.
[SHEET133] : P.E. DODD, "Device simulation of charge collection and single-event upset", 1996.
[SHEET134] : "Numerical simulation of heavy ion charge generation and collection dynamics", 1993.
[SHEET135] : "Temperature dependence of single-event burnout in n-channel power MOSFETs (for space application)", 1992.
[SHEET136] : "Simulating single-event burnout of n-channel power MOSFET's", 1993.
[SHEET137] : G. ANTONOIU, G. DIMA, M.D. PROFIRESCU, "Parallel domain decomposition for 3D semiconductor device simulation", 1998.
[SHEET138] : F. UDREA, A. POPESCU, W. MILNE, "3D RESURF junction", 1998.
[SHEET139] : A.R. BROWN, A. ASENOV, J.R. BARKER, "3D parallel finite element simulation of in-cell breakdown in lateral-channel IGBTs", 1998.
[SHEET140] : A. HAMIDI, G. COQUERY, R. LALLEMAND, P. VALES, J.M. DORKEL, "Temperature measurements and thermal modeling of high power IGBT multichip modules for reliability investigations in traction applications", Microelectronics and Reliability, vol. 38, no. 6-8, J
[SHEET141] : T.E. WONG, I. SUASTEGUI, H.M. COHEN, A.H. MATSUNAGA, "Experimentally validated thermal fatigue life prediction model for leadless chip carrier solder joint", 1998.
[SHEET142] : F.S. POPELAR, "Parametric study of flip chip reliability based on solder fatigue modelling: Part II - flip chip on organic", 1998 International Symposium on Microelectronics,  Nov. 1998, pp. 497-504.
[SHEET143] : S. OSAMU, F. KAZUMASA, K. HEIKICHI, T. TOSHIO, "Simulation of the transient temperature distribution in a high-power semiconductor device cooling apparatus using heat pipes", 1997.
[SHEET144] : C. BASARAN, R. CHANDAROY, "Finite element simulation of the temperature cycling tests", 1997.
[SHEET145] : S.F. POPELAR, "Parametric study of flip chip reliability based on solder fatigue modelling", 1997.
[SHEET146] : K.J. DITTMER, M.H. POECH, F.W. WULFF, M. KRUMM, "Failure analysis of aluminum wire bonds in high power IGBT modules", Proceedings of the Spring Meeting on MRS, San Francisco, USA, April 1995, pp. 251-256.
[SHEET147] : C. Fürböck, N. Seliger, D. Pogany, M. Litzenberger, E. Gornik, M. Stecher, H. Gossner, W. Werner, "Backside Laserprober characterization of thermal effects during high current stress in Smart Power ESD protection devices", IEDM Tech. Digest, 1998, pp. 691
[SHEET148] : A. CHEN, X. GUI, G.-B. GAO, "Modelling of thermal fatigue failure in soft-soldered semiconductor devices using the internal variable method", 1990.
[SHEET149] : J.F. BURGESS, R.O. CARLSON, H.H. GLASCOCK, C.A. NEUGEBAUER, H.F. WEBSTER, "Solder fatigue problems in power packages", IEEE Trans Compon Hybrids Manuf Technol, Vol. CHMT-7, No. 4, Dec 1984, pp. 405-410.
[SHEET150] : R.O. CARLSON, A.J. YERMAN, J.F. BURGESS, C.A. NEUGEBAUER, "Voids, cracks, and hot spots in die attach", Annual Proceedings IEEE Electron Devices Soc, april 1983, pp. 138-141.
[SHEET151] : D.R. OLSEN, H.M. BERG, "Properties of die bond alloys relating to thermal fatigue", 1979.
[SHEET152] : K.S. KANG, N.D. ZOMMER, L. DONALD, R.W. HECKEL, "Thermal fatigue failure of soft-soldered contacts to silicon power transistors", 1977.
[SHEET153] : P. LIN, J. LEE, S. IM, "Design considerations for a flip- chip joining technique", 1970.
[SHEET154] : M.P. RODRIGUEZ, N.Y.A. SHAMMAS, A.T. PLUMPTON, D. NEWCOMBE, D.E. CREES, "Finite element modelling of thermal fatigue effects in IGBT modules", 1999.
[SHEET155] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, H. SWIATEK, G. SWIATEK, "Semiconductor device failures in power converter service conditions", EPE Journal, Dec. 1998, vol. 7, no. 3-4, pp. 12-17.
[SHEET156] : V. BENDA, "Reliability of power semiconductor devices - Problems and trends", PEMC'96, vol.1, pp. 30-35, 2-4 Sept. 1996.
[SHEET157] : J. KOHALMI, "Ageing of semiconductors. Check tests gained from experience with M.S.R.(MAV) rectifier locomotives", 1970.
[SHEET158] : W. WU, G. GAO, L. DONG, Z. WANG, M. HELD, P. JACOB, P.SCACCO, "Thermal reliability of power insulated gate bipolar transistor (IGBT) modules", 1996, Proceedings of the 12th Annual IEEE SEMI THERM Symposium, pp. 136-141.
[SHEET159] : L.H. CHANG, W.A. ANDERSON, "Stability of BaTiO3 thin films on Si", 1994.
[SHEET160] : W. POGROSZELSKI, R. SCHMIDT, "Thermal fatigue of electronic components", 1989.
[SHEET161] : D. POTE, G. THOME, T. GUTHRIE, "An overview of infrared thermal imaging techniques in the reliability and failure analysis of power transistors", 1987.
[SHEET162] : W. BRESCH, A.P. CONNOLLY, "Future trends of power semiconductor modules", 1986.
[SHEET163] : Gao Guang-bo; Chen An; Gui Xiang, "A layer damage model for calculating thermal fatigue lifetime of power devices", 1986.
[SHEET164] : A.J. YERMAN, J.F. BURGESS, R.O. CARLSON, C.A. NEUGEBAUER, "Hot spots caused by voids and cracks in die attach", Proceedings of the 33rd Electronic Components Conference, 16-18 May 1983, pp. 578-582.
[SHEET165] : V.S. CANDADE, "Sequence test method for reliability evaluation of semiconductor devices", 1981.
[SHEET166] : A.T. ENGLISH, C.M. MELLIAR-SMITH, "Reliability and failure mechanisms of electronic materials",Annual review of materials science, vol.8, 1978, pp. 459-495.
[SHEET167] : J.W. HATHAWAY, C.C. YU, "Thermal fatigue testing of discrete components", IBM, 1977.
[SHEET168] : P. ALOISI, "Failure diagnosis in medium power semiconductor", EPE'91, Firenze, vol. 3, pp. 117-119.
[SHEET169] : I.L. SOMOS, D.E. PICCONE, L.J. WILLINGER, W.H. TOBIN, "Power semiconductors empirical diagrams expressing life as a function of temperature excursion", IEEE Transactions on Magnetics, jan. 1993, vol. 29, issue 1, part 2, pp. 517-522.
[SHEET170] : R. ABID, F. MISEREY, "Temperature non contact measurements on the surface of a GTO thyristor in commutation",EPE'95, septembre 1995, pp.  2.191-
[SHEET171] : S. RAEL, E. CLAVEL, Y. MARECHAL, CH. SCHAEFFER, "PMCM conception methodology: development of a 3D electrothermal simulation tool", EPE'95, septembre 1995, pp. 1.177-
[SHEET172] : Z. LISIK, R. BARCZEWSKI, J. PODGORSKI, M. KOPEK, "3-D simulation of heat transfer in power semiconductor devices", EPE'95, septembre 1995, vol. 2, pp. 2.277-2.281.
[SHEET173] : P. MICHALAK, H. POULIQUEN, A. GRANDET, M.J.F. TISSIER, "175/188HZ mains signalling active filters for connecting independent electricity producers", EPE'97, vol. 1, pp. 459-.
[SHEET174] : "Measurement of buried oxide thermal conductivity for accurate electrothermal  simulation of SOI devices".
[SHEET175] : "Using the Wigner function for quantum transport in device simulation".
[SHEET176] : "HEMT device characteristics calculation and modeling based on device  structure".
[SHEET177] : "Spatial temperature profiles due to nonuniform self-heating in LDMOS's in  thin SOI".
[SHEET178] : "Modeling of the critical current density of bipolar transistor with  retrograde collector doping profile".
[SHEET179] : "Thermal simulation of energetic transients in multilevel metallisation  systems".
[SHEET180] : "Low-temperature impurity breakdown in semiconductors:  an approach towards  efficient device simulation".
[SHEET181] : S. DALIENTO, N. RINALDI, A. SANSEVERINO, P. SPIRITO, "Two-dimensional analysis of a test structure for lifetime profile  measurements", IEEE Transactions on Electron Devices, Vol. 42, NO. 11, November 1995, pp. 1924-1928.
[SHEET182] : "Thermal parameter estimation using recursive identification".
[SHEET183] : "SEU sensitive depth in a submicron SRAM technology", 1997.
[SHEET184] : "Use of the three-dimensional TLM mehtod in the thermal simulation and design of semiconductor devices", 1992.
[SHEET185] : "Simulation sur microcalculateur de l'ouverture des thyristors GTO", 1990.
[SHEET186] : "Heavy ion induced failures in a power IGBT", 1997.
[SHEET187] : "SEU critical charge and sensitive area in a submicron CMOS technology", 1997.
[SHEET188] : "On a Petrov-Garlerkin method for the electrical and thermal behaviour of semiconductor devices in two dimensions".
[SHEET189] : "Semiconductor device modelling from the numerical point of view".
[SHEET190] : C. AMBARIAN, "MOSFETs and IGBTs - From the State-of-the-Art to Future Trends"
[SHEET191] : M. CRAPPE, L. GERTMAR, A. HABOCK, W. LEONHARD, D. POVH, "Power Electronics and Control by Microelectronics in Future Energy Systems" EPE Journal, vol. 10, no. 1, 2000.
[SHEET192] : E. PROFUMO, A. TENCONI, S. FACELLI, B. PASSERINI, A. GUERRA, "An Experimentally Validated Transient Thermal Impedance Model for High Power Diodes and Thyristors", EPE Journal, Volume 9, N° 3/4, january 2000, pp. 11-16.
[SHEET193] : I.L. SOMOS, D.E. PICCONE, L.J. WILLINGER, W.H. TOBIN, "Power Semiconductors-A New Method For Predicting The On-State Characteristic and Temperature Rise During Multi Cycle Fault Currents", conf.Rec.IEEE.IAS'93, vol. 2, pp.1242-1247.
[SHEET194] : D.G. McGHEE, "Pulsed Power Supply for Three APS Septum Magnets", LS Note 170, March 24, 1991
[SHEET195] : D.E. PICCONE, I.L. SOMOS, W.H. TOBIN, "Piecewise Simulation (PS) Computation Method for Computing Transient Phenomena," IEEE-IAS Annual Meeting, September 1975, pp. 326-331.
[SHEET196] : R.G. RODRIGUES, D.E. PICCONE, W.H. TOBIN, L.W. WILLINGER, J.A. BARROW, T.A. HANSEN, J. ZHAO, L. CAO, "Operation Of Power Semiconductors At Their Thermal Limit", 1998 IEEE IASociety Annual Meeting, October 12-15, 1998, 12 pages.
[SHEET197] : R. RODRIGUES, D.E. PICCONE, A. HUANG, R. De DONCKER, "A Very High Voltage, Large Area MTOtm (MOS Turn Off Thyristor) for PEBB Applications", GOMAC '97, 10-13 March 1997, 12 pages.
[SHEET198] : R. RODRIGUES, D.E. PICCONE, A. HUANG, R. De DONCKER, "MTOtm Thyristor Power Switches", Power Systems World ‘97, September 6-12, 1997, 12 pages.
[SHEET199] : PO. SEGLEN, "Why the impact factor of journals should not be used for evaluating research", Brit Med J, 1997, 314, 498-502.
[SHEET200] : D.E. PICCONE, L.O. ERIKSSON, J. URBANEK, W.H. TOBIN, I.L. SOMOS, "A thermal analogue of higher accuracy and factory test method for predicting and supporting thyristor fault suppression ratings", IAS 1988, vol. 14, pp. 678-686.
[SHEET201] : I. SOMOS, D.E. PICCONE, "Behavior of thyristos under transient conditions", Proceedings of the IEEE, vol. 55, no. 8, august 1967, pp. 1306-1311.
[SHEET202] : B. ROEHR, B. SHINER, "Transient thermal resistance, general data and its use", AN 569, Motorola, 1972.
[SHEET203] : B. ROEHR, "Mounting techniques of power transistor",  AN 778, Motorola, 1978.
[SHEET204] : I.L. SOMOS, L.O. ERIKSSON, W.H. TOBIN, "Understanding di/dt ratings and life expectancy for thyristors", Power Conversion And Intelligent Motion, pp. 56-59, February 1986.
[SHEET205] : D.E. PICCONE, I.L. SOMOS, "Accelerated life tests for determining the life expectancy of thyristors due to di/dt failure modes", IEEE Industry Applications Society 1972 Conference Record, pp. 89-92.
[SHEET206] : J.W.MOTTO JR, W.H. KARSTAEDT, J.M.SHERBONDY, S.G. LESLIE, "Modeling Thyristor and Diodes; On-State Voltage and Transient Thermal Impedance, Effective Tools in Power Electronic Design",
[SHEET207] : N. IDIR, J.J. FRANCHAUD, R. BAUSIERE, "New Control Technique achieves low di/dt and dv/dt", PCIM, february 2000.
[SHEET208] : P. LINDMAN, "Thermal Design-In of DC/DC Converters", PCIM.
[SHEET209] : T. WU, "Cdv/dt induced turn-on in synchronous buck regulators", International Rectifier.
[SHEET210] : D. JAUREGUI, "Estimating T J of SO-8 Power MOSFETs", DESIGN TIP DT 99-2, International Rectifier.
[SHEET211] : T. KAHN, "Comprehensive voltage evaluation according to EN 50 160 - a contribution to quality assurance".
[SHEET212] : A.L. JULIAN, R.S. WALLACE, P.K. SOOD, "Multi-speed control of single-phase induction motors for blower applications", IEEE Transactions on Power Electronics, pp. 72-77, Jan. 1995, Vol. 10, no. 1
[SHEET213] : I.L. SOMOS, D.E. PICCONE, L.J. WILLINGER, W.H. TOBIN, "Power semiconductors-a new method for predicting the on-state characteristic and temperature rise during multicycle fault currents", IEEE Transactions on Industry Applications,  Nov.-Dec. 1995, pp. 12
[SHEET214] : "Power semiconductor devices-examination of subcycle surge current ratings as needed for fuse selection"
[SHEET215] : D.E. PICCONE, R.W. DE DONCKER, J.A.BARROW, W.H. TOBIN, "The MTO thyristor-a new high power bipolar MOS thyristor", Conference Record of the 1996 IEEE Industry Applications Conference, Thirty-First IAS Annual Meeting, IAS'96, October 1996, pp. 1472-1473.
[SHEET216] : "Design and testing of high power, repetitively pulsed, solid-state closing switches
[SHEET217] : P. KEMPF, R. HADAWAY, J. KOLK, "Complementary metal oxide semiconductor compatible high-voltage transistors", 1987.
[SHEET218] : B. KUZMANOVIC, "Destructive oscillations in low inductance diode circuit", Conference Record of the 1989 IEEE Industry Applications Society Annual Meeting, 1989, pp. 1301-1306.
[SHEET219] : I.L. SOMOS, D.E. PICCONE, W.H. TOBIN, "Two-dimensional heat flow in a GTO having a highly interdigitated emitter", 1989.
[SHEET220] : L.O. ERIKSSON, D.E. PICCONE, L.J. WILLINGER, W.H. TOBIN, "Selecting fuses for power semiconductor devices", IEEE Industry Applications Magazine, Volume 2, Issue 5, Sept.-Oct. 1996, pp. 19-23.
[SHEET221] : "Turn-off characteristics of 1000 V SiC gate-turn-off thyristors", ISPSD'98.
[SHEET222] : "Demonstration of a 700 volt asymmetrical, 4H-SiC gate-turn-off thyristor (GTO)", 1997.
[SHEET223] : E. Vasilyeva, D. Januszewski, M. Leonowicz, "Mechanically alloyed Sm-Fe-N magnets with addition of Ga", IEEE Transactions on Magnetics, 1997, pp. 3853-3855.
[SHEET224] : "Application Of Shock Compression Technique For Consolidation Of Hard Magnetic Powders3? 1998
[SHEET225] : E. Vasilyeva, D. Januszewski, M. Leonowicz, "Mechanically Alloyed Sm-Fe-N Magnets With Addition Of Ga", INTERMAG '97.
[SHEET226] : "Consequences of internal short-circuits in very high power converters", 1996.
[SHEET227] : "Calculation of snubber circuits for two series-connected thyristors of unequal ecovery current", 1976.
[SHEET228] : D.E. PICCONE, I. SOMOS, "Double-triggering semiconductor controlled rectifier",  Patent Information USA 3440501 22 April 1969.
[SHEET229] : D.E. PICCONE, I.S. SOMOS, "Are you confused by high di/dt SCR ratings?", Electronic Engineer, Jan. 1969, vol. 28, no. 1, pp. 89-92.
[SHEET230] : I.L. SOMOS, D.E. PICCONE, W.H. TOBIN, "Plasma spreading loss in 100mm thyristors", PCIM magazine, june 1988.
[SHEET231] : I.L. SOMOS, D.E. PICCONE, W.H. TOBIN, "Plasma spreading in 6 KV, 100 mm diameter thyristors", IEEE Industry Applications Society Annual Meeting 1987, pp. 521-526.
[SHEET232] : I.L. SOMOS, L.O. ERIKSSON, W.H. TOBIN, "Establishing conditions for a meaningful di/dt test for thyristors", Proceedings of the Tenth International PCI '85 Conference, Chicago, Oct. 19855, pp. 113-121.
[SHEET233] : "POWER LOSS IN LARGE AREA THYRISTORS DESIGNED FOR 50/60 HZ PHASE CONTROL RECTIFIER CIRCUITS", 1981.
[SHEET234] : "The influence of the gate polarisation on the circuit commutated recovery time and critical rate of rise of off-state voltage of thyristors", 1972.
[SHEET235] : I.L. SOMOS, D.E. PICCONE, "Temperature excursion in thyristors due to short current pulses during forward conduction and reverse recovery phase", IAS, 1974.
[SHEET236] : "Recovery charge in silicon diodes and thyristor", 1972.
[SHEET237] : I. SOMOS, D.E. PICCONE, "Plasma spread in high-power thyristors under dynamic and static conditions", IEEE Trans Electron Devices, vol. ED-17, no. 9, Sept. 1970, pp. 680-687.
[SHEET238] : I. SOMOS, D.E. PICCONE, "Some observations of static and dynamic plasma spread in conventional and new power thyristors.", 1969, pp. 1-7.
[SHEET239] : "4H-SiC gate turn-off (GTO) thyristor development", 1997.
[SHEET240] : "FIELD TERMINATED DIODE", 1976
[SHEET241] : "FIELD CONTROLLED THYRISTOR (FCT)-A NEW ELECTRONIC COMPONENT", 1975.
[SHEET242] : "So what's the story about validation? (MUMPS, standard computer language)", 1988.
[SHEET243] : D.E. PICCONE, L.H. SPEROW, L.O. ERICKSSON, R.O. FULTON, "Predicting the behavior of power semiconductors under fault conditions", IAS, 1972
[SHEET244] : "Semiconductor rectifier assembly having high explosion rating", patent 1971.
[SHEET245] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, H. SWIATEK, "Some observation dealing with the failures of IGBT transistors in high power converters", Microelectronics and Reliability, vol. 38, no. 6-8, Jun-Aug 1998, pp. 1325-1330.
[SHEET246] : S. JANUSZEWSKI, "Non-destructive method for determination of overload capacity of high power semiconductor devices", 1982
[SHEET247] : "Influence of Thyristors on Modern Technology", 1975.
[SHEET248] : "Effect of Gate Polarization on the Switch-Off Current in Thyristors", 1973.
[SHEET249] : "Tests of the Critical Rate of Rise of Voltages in Symmetric Thyristors", 1972.
[SHEET250] : S. JANUSZEWSKI, H. SWIATEK, K. ZYMMER, "Some experiences concerning of a starting and service of high power IGBT converters", EPE'97, vol. 3, pp.103-108.
[SHEET251] : "Switching phenomena in thyristors", 1973.
[SHEET252] : "Service problems of power electronics circuits with GTO thyristors", 1998.
[SHEET253] : "Some problems dealing with the use of GTO thyristors in high power converters", 1998.
[SHEET254] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, H. SWIATEK, K. ZYMMER, "IGBT transistor failures in high power converters", ISPS '96 Proceedings, 11-13 Sept 1996, pp. 177-184.
[SHEET255] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, H. SWIATEK, "Causes and mechanisms of semiconductor device failures in power converter service conditions", 1995.
[SHEET256] : "Voltage and current steepnesses in thyristors", 1973.
[SHEET257] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, "Semiconductor power devices failures in converter circuits", 1993.
[SHEET258] : S. JANUSZEWSKI, "Discrete semiconductor devices and power integrated circuits used in power electronics equipments", 1993.
[SHEET259] : "Influence of short-circuit currents on the operation of very high power converter equipments", 1993.
[SHEET260] : "Load capacity of power thyristors at high current intensities", 1992.
[SHEET261] : "Expert systems for power electronics", 1991.
[SHEET262] : "Power electronics-technology of the future", 1991.
[SHEET263] : "25 years of service of automatic mobile rectifier substation in the Polish mining industry", 1990.
[SHEET264] : "High power semiconductor equipment", 1981 !
[SHEET265] : "Effect of initial biasing of gate on electrical properties of thyristors", 1974.
[SHEET266] : "Study on conditions of regaining valve properties by thyristors", 1974.
[SHEET267] : H. AKAGI, "The State-of -the-Art of Power Electronics in Japan", IEEE Trans. on Power Electr., vol. 13, no. 2, pp. 345-356, March 1998.
[SHEET268] : D.E. PICCONE, I.L. SOMOS, "Accelerated life tests for determining life expectancy of thyristors due to di/dt failure modes", IEEE / IGA, Conference Record, 1971.
[SHEET269] : J.K. CHESTER, "A new technique for deriving self-consistent electrical and thermal models of thyristors during surge loops and from experimental data", IEE (UK), Conference Publication 154, Power Electronics-Power Semiconductors, September 1979.
[SHEET270] : A. HERLET, P. VOSS, "State of the art in power semiconductors", IEEE / IAS International Semic0nductor Power Conversion Conference Record, 1997.
[SHEET271] : H.B. ASSALIT, W.H. TOBIN, S.J. WU, ""Effect of gate configuration on thyristor plasma properties", IEEE Industry Industry Applications Society, Conference Record, 1978, pp. 1012-1018.
[SHEET272] : D.E. PICCONE, L.J. WILLINGER, I.L. SOMOS, W.H. TOBIN, R.M. ANDRACA, L.O. ERIKSSON, J.A. BARROW, M.L. CHILDS, J. SCHWARTZENBERG, "Clarification of Non-repetitive On-state Surge Current Ratings - Insight Into Proposed Ratings for Pulse Power Applications -
[SHEET273] : A.J. BLUNDELL, "The effect of on-state temperature coefficient on thyristor junction temperature calculations:", IEE 1969 Conf. Publication 53, London, U.K., pp. 53-60.
[SHEET274] : J.K. CHESTER, N.Y.A. SHAMMAS, "Isothermal V-I characteristic of high power thyristors up to surge current levels", UPEC'90, p. 49-52.
[SHEET275] : H. BLEICHNER, M. ROSLING, M. BAKOWSKI, J. VOBECKY, "Measurements of failure phenomena in inductively loaded multi-cathode GTO thyristors", IEEE Trans. on Electron. Devices, vol. 41, No. 2, 1994, pp. 251-257.
[SHEET276] : BORRAS0 R., ALOISI P., SUMATE D., "Avalanche capability of today's power semiconductors", EPE Brighton, vo1.2 Materials and Devices, 1993, pp. 167-172.
[SHEET277] : Y. HAYASAKI, "A consideration on turn-off failure of GTO with amplifying gate", IEEE Trans. on Power Electronics., vol. PE-2, No.2, 1987, pp.90-97
[SHEET278] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, "Failure physics of high power thyristors (in Polish)", Prace Przemyslowego Instytutu Elektroniki, No.115, 1991
[SHEET279] : K. REINMUTH, H. AMANN, "The ruggedness of paralleled power MOSFET's", EPE Brighton, 1993, pp. 380-384.
[SHEET280] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, H. SWIATEK, "Failure mechanisms of power MOSFET transistors", Proc. of the XIII Symposium phenomena in non-linear circuits, Poznañ (Poland), May 1994, pp. 207-212.
[SHEET281] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, H. SWIATEK, "Thyristor service in variable current load conditions (in Polish)", Wiadomoaeci Elektrotechniczne, No. 10, 1994.
[SHEET282] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, E. STYPULKOWSKA, H. SWIATEK, G. SWIATEK, "New generation semiconductor device failures in power electronics equipment", International Conference and Exhibition on Power Electronics, Motion Control and Associated A
[SHEET283] : S. JANUSZEWSKI, H. SWIATEK, "Modern semiconductor devices in power electronics (in Polish)", WNT, Warszawa 1994.
[SHEET284] : S. JANUSZEWSKI, M. KOCISZEWSKA-SZCZERBIK, E. STYPULKOWSKA, H. SWIATEK, G. SWIATEK, "Investigation of destroyed parts of surface of high power semiconductor devices in service conditions", Proceedings of the 6th European Symposium Reliability of Electron D
[SHEET285] : K. REINMUTH, "A method for non-destructive testing of bipolar transistors, IGBT's and MOSFET's", EPE Firenze 1991, pp. 0-142....0-147.
[SHEET286] : S. JANUSZEWSKI, H. SWIATEK, "Power semiconductor device measurements (in Polish)", WKiL, Warszawa 1996.
[SHEET287] : C.M. JOHNSON, A.A. JAECKLIN, R.P. PALMER, "Correlation between local segment characteristics and dynamic current redistribution in GTO power thyristors", IEEE Trans.on El. Dev., vo1.41, No.5, 1994, pp. 793-799.
[SHEET288] : Matsuda H. et al., "Analysis of GTO failure mode during DC voltage blocking", , ISPSD'94 Davos(Switzerland), May 31-June 2 1994, pp. 221-225.
[SHEET289] : H. FUJITA, H.AKAGI, "The unified power quality conditioner: the integration of series- and shunt-active filters", IEEE Transactions on Power Electronics, March 1998, Vol. 13, No. 2, pp. 315-322.
[SHEET290] : AN1172, L. GONTHIER, "The new ACStm series: a breakthrough in ruggedness & drive for home appliances",  APPLICATION NOTE AN1172, september 1999, 17 pages.
[SHEET291] : Y. TAKAHASHI, K. YOSHIKAWA, M. SOUTOME, T. FUJII, M. ICHIJYOU, M.Y. SEKI, "2.5 kV-1000 A power pack IGBT (high power flat-packaged RC-IGBT)
[SHEET292] : W. WU, M. HELD, P. JACOB, P. SCACCO, A. BIROLINI, "Thermal stress related packaging failure in power IGBT modules", ISPSD'95.
[SHEET293] : [D3555], "Machines à courant continu", F. BERNOT, Techniques de l'Ingénieur, mai 1999.
[SHEET294] : [D3556], "Machines à courant continu", F. BERNOT, Techniques de l'Ingénieur, mai 1999.
[SHEET295] : [D3557], "Machines à courant continu", F. BERNOT, Techniques de l'Ingénieur, mai 1999.
[SHEET296] : [D3558], "Machines à courant continu", F. BERNOT, Techniques de l'Ingénieur, novembre 1999.
[SHEET297] : [R300], "Traitement du signal. Filtrage - Paramètres caractéristiques d'un signal", J. AUVRAY, Techniques de l'Ingénieur, juillet 1986.
[SHEET298] : [R1156], "Mesures en radiofréquence - Analyseurs de Fourier", C. CATZ, Techniques de l'Ingénieur, janvier 1996.
[SHEET299] : [A142], "Mathématiques fondamentales - Analyse harmonique, distributions, convolution", T. LACHAND-ROBERT, Techniques de l'Ingénieur, novembre 1993.
[SHEET300] : [D5935], "Électrothermie industrielle - Chauffage par induction électromagnétique : principes", G. DEVELEY, Techniques de l'Ingénieur, février 2000.
[SHEET301] : [AF143], "Mathématiques fondamentales - Intégrales de Fourier ", H. QUEFFELEC, Techniques de l'Ingénieur, avril 1999.
[SHEET302] : [D32][D33], "Notions de base - Mathématiques pour l'électricien", E. ROUBINE, Techniques de l'Ingénieur, août 1999.
[SHEET303] : [AF141], "Mathématiques fondamentales - Séries de Fourier", H. QUEFFELEC, Techniques de l'Ingénieur, avril 1999
[SHEET304] : H.D. SOLOMON, V. BRZOZOWSKI, D.G. THOMPSON, "Predictions of solder joint fatigue life", 1990
[SHEET305] : H.D. SOLOMON, "The influence of hold time and fatigue cycle wave shape on the-low cycle fatigue of 60/40 solder", 1988.
[SHEET306] : J.W. McPHERSON, H.C. MOGUL, "Disturbed bonding states in SiO/sub 2/ thin-films and their impact on time-dependent dielectric breakdown", 1998.
[SHEET307] : H.D. SOLOMON, "Low cycle fatigue of surface mounted chip carrier/printed wiring board joints", 1989.
[SHEET308] : B. WONG, D.E. HELLING, R.W. CLARK, "A creep-rupture model for two-phase eutectic solders", Sept. 1988.
[SHEET309] : A.D. SOLOMON, "Latent Heat Thermal Energy Storage And Waste Heat Reuse In A Single Periodic Kiln", 1990.
[SHEET310] : K. SHIMADA, J. KOMOTURI, M. SHIMIZU, "Applicability of the Manson-Coffin law and miner's law to extremely low cycle fatigue", Nippon Kikai Gakkai Ronbunshu A Hen, vol. 53, no 491, July 1987, pp. 1178-1185.
[SHEET311] : "CORRELATION BETWEEN STRAIN SINGULARITY AT CRACK TIP UNDER OVER-ALL PLASTIC DEFORMATION AND THE EXPONENT OF MANSON-COFFIN LAW.
[SHEET312] : C.V. COOPER, M.E. FINE, "COFFIN-MANSON RELATION FOR FATIGUE CRACK INITIATION", Scripta Metallurgica, vol. 18, no. 6, June 1984, pp. 593-596.
[SHEET313] : "Effect of axial compression on low- cycle fatigue of metals in torsion.
[SHEET314] : "Crack propagation and initiation in low cycle strain controlled fatigue.
[SHEET315] : X.Q. SHI, H.J.J. PANG, W. ZHOU, Z.P. WANG, "Low cycle fatigue analysis of temperature and frequency effects in eutectic solder alloy", International Journal of Fatigue, vol. 22, no. 3, 2000, pp. 217-228.
[SHEET316] : Q. YAO, J. QU, S.X. WU, "Solder fatigue life in two chip scale packages", 1999.
[SHEET317] : S. Kitajo, S. Ohkawa, N. Senba, K. Hashimoto, N. Ebihara, "Using thermal stress simulation to estimate stacked memory module reliability under thermal cycle test", 1999.
[SHEET318] : J. NADERMAN, R.T.H. ROGEN, "Thermal resistance degradation of surface mounted power devices during thermal cycling", Microelectronics and Reliability, Vol. 39, No 1, January 1999, pp. 123-132.
[SHEET319] : "Low-cycle fatigue crack initiation and break in strain-life curve of Al-Li 8090 alloy.
[SHEET320] : V. SARIHAN, "Energy based methodology for damage and life prediction of solder joints under thermal cycling", Proceedings of the 43rd Electronic Components and Technology Conference, 1993, pp. 32-38.
[SHEET321] : R. SUNDARARAJAN, P. McCLUSKEY, S. AZARM, "Semi analytic model for thermal fatigue failure of die attach in power electronic building blocks", 4th High Temperature Electronics Conference, 1998, pp.99-102.
[SHEET322] : B. VANDEVELDE, E. BEYNE, "Thermal fatigue reliability analysis of redistributed flip chip assemblies", 1998.
[SHEET323] : H.D. SOLOMON, "Low cycle fatigue of 60/40 solder plastic strain limited vs. displacement limited testing," Electron. Packag.: Mater. Processes, pp. 29-47, 1989.
[SHEET324] : H.D. SOLOMON, E.D. TOLKSDORF, "Energy approach to the fatigue of 60/40 solder: Part II-In uence of hold time and asymmetric loading," J. Electron. Packag., vol. 118, pp. 67-71, 1996.
[SHEET325] : H.D. SOLOMON, "Low Cycle Fatigue ASTM STP-942", ASTM, pp. 342-371, 1988.
[SHEET326] : V. SARIHAN, "Energy based methodology for damage and life prediction of solder joints under thermal cycling", IEEE Components and Manufacturing Technology, vol. 17, pp. 626-631, 1994.
[SHEET327] : L.F. Coffin, "Predictive Parameters and their Application to High Temperature Low-Cycle Fatigue," Fracture 1969 (Proc. 2d. Int. Conference on Fracture), London, Chapman and Hall, 1969, p. 643-654.
[SHEET328] : S.S. MANSON, "Interfaces between Fatigue Creep and Fracture." Int. J. of Fracture Mechanics, 2(1), 1966, pp. 327-363.
[SHEET329] : L.F. COFFIN, "A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal", Transactions of ASME, 1954, vol. 76, pp. 931-950.
[SHEET330] : A.A. JAECKLIN, "Power-Semiconductor Devices and Circuits", Asea Brown Boveri Symposia Series, Plenum Publishing Corporation, 1992.
[SHEET331] : A. DASGUPTA, M. PECHT, "Material failure mechanisms and damage models", IEEE Transactions on Reliability, vol. 40, no. 5, December 1991, pp. 531-536.
[SHEET332] : D.B. PARKER, A. DASGUPTA, M.G. PECHT, "PWB solder joint life calculations under thermal and vibrational loading", 1991.
[SHEET333] : A. DASGUPTA, J.M. HU, "Failure mechanism models for brittle fracture", IEEE Transactions on Reliability, vol. 41, no. 3, September 1992, pp. 328-335.
[SHEET334] : A. DASGUPTA, C. OYAN, D. BARKER, M. PECHT, "Solder Creep-Fatigue Analysis by an Energy Partitioning Approach", Transactions of ASME, vol. 114, 1992, pp. 152-160.
[SHEET335] : H.A. NEID, "Edge Crack Stress Intensity Factors in Layered Ceramic Metal Composites Due to Thermal Mismatch", International Conference on Failure Analysis, pp. 59-68, 1991.
[SHEET336] : Y.H. PAO, W. JUNG, R. COOPER, V.A. SANKARAN, X. XU, "Thermal Fatigue Modeling of Solder Interlayer in Power Electronics", Advances in Electronic Packaging, 1995, vol. 10, pp. 1059-1068.
[SHEET337] : Y.H. PAO, R. GOVILA, "An Experimental and Finite Element Study of Thermal Fatigue Fracture of Pb-Sn Solder Joints", ASME Journal of Electronic Packaging, 1993, vol. 115, pp. l-8.
[SHEET338] : E. SUHIR, "Die Attachment and its Influence on Thermal Stresses in the Die and the Attachment", Proceedings of IEEE Electronic Component and Technology Conferences, Proceedings of IEEE Electronic Component and Technology Conferences, 1981, pp. 508-517.
[SHEET339] : W. WU, P. SCACCO, M. HELD, P. JACOB, "Electrical Overstress Failure in Power Insulated Gate Bipolar Transistors Modules", 21th International Symposium for Testing and Failure Analysis, 1995, pp 159-162.
[SHEET340] : S.E. YAMADA, "A Bonded Joint Analysis for Surface Mount Components", ASME Journal of Electronic Packaging, 1992 vol. 114, pp. 1-7.
[SHEET341] : C. Van GODBOLD, V.A. SANKARAN, J.L. HUDGINS, "Novel designs in power modules", 1995
[SHEET342] : H.D. Solomon, "The Creep and Strain Rate Sensitivity of a High Ph Content Solder," AIME symposium on Deformation in Electronic Materials and Devices, Oct. 1989.
[SHEET343] : K.C. NORRIS, A.H. LANDZBERG, "Reliability of Controlled Collapse Interconnections." IBM J. Res. Develop., vol. 13, p. 266 (1969).
[SHEET344] : R. SATOH, K. ARAKAWA, M. HARADA, K. MATSUI, "Thermal fatigue life of Pb-Sn alloy interconnections", IEEE Transactions on Components, Hybrids, and Manufacturing Technology,  march 1991, vol. 14, no. 1, pp. 224-232.
[SHEET345] : S.S. MANSON, "Fatigue: A complex subject - Some simple approximations", Experimental Mechanics, vol. 5, pp.193-226, 1965.
[SHEET346] : L.F. COFFIN, "Low cycle fatique: A review", Appl. Mech. Res., vol. 1, no. 3, pp. 129-141, oct. 1962.
[SHEET347] : S. FORSTER, T. LEQUEU, "Surtension de gâchette à la fermeture des triacs", JNRDM'2000, 4-5 mai 2000, Montpellier.
[SHEET348] : S. FORSTER, T. LEQUEU, R. JERISIAN,A. HOFFMANN, "3-D analysis of the breakdown localized defects of ACSTM through a triac study", ESREF'2000, october 2000, pp. 1695-1700.
[SHEET349] : J.M. SIMMONET, "Analyse du fonctionnement du triac type TOP-Glass par amorçage en dI/dt par la gâchette dans Q2", rapport interne STMicroelectronics, août 1998.
[SHEET350] : B.-J. BALIGA, "Evolution of MOS-bipolar semiconductor technology", proceeding IEEE, 1988, vol. 76, pp. 409-418.
[SHEET351] : S. NITTA, "The Future of EMC Technology", Vol. E83-B, No. 3, pp.435-443, march 2000.
[SHEET352] : BARTON, T.H. "Pulse-Width Modulation Waveform - the bessel Approximation", IEEE Conférence Record of the IAS, 1978
[SHEET353] : R.L. DAVIES, J. PETRUZELLA, "P-N-P-N charge dynamics", 1967, procceding of IEEE, vol. 55, no. 8, pp. 1318-1330.
[SHEET354] : P. JACOB, M. HELD, P. SCACCO, W. WU, "Reliability testing and analysis of IGBT power semiconductor modules", IEE proc. IGBT propulsion drives, London, pp. 4.1-4.5, 1995.
[SHEET355] : Z. KHATIR, S. LEFEBVRE, "Thermal analysis of high power IGBT modules", ISPSD'2000, Toulouse, France, May 22-25, 2000, pp. 271-274.
[SHEET356] : A. HAMIDI, G. COQUERY, R. LALLEMAND, "Effects of current density and chip temperature distribution on lifetime of high power IGBT modules in traction working conditions", European Symposium on Reliability of Electron Devices, Failure Physics and Analysis,
[SHEET357] : G. COQUERY, "Les modules IGBT de forte puissance. Leur essor dans les applications de traction ferroviaire", REE no. 9, pp. 52-59, Octobre 1998, Paris.
[SHEET358] : T. SCHUTZE, H. BERG, M. HIERHOLZER, "Further improvements in the reliability of IGBT Modules", Proc. of IAS, 1998.
[SHEET359] : P. JACOB, M. HELD, P. SCACCO, W. WU, "Reliability testing and analysis of IGBT power semiconductor modules", Proceeding of the 20th International Symposium for Testing and Failure Analysis, 1994, pp. 319-325.
[SHEET360] : A. HAMIDI, G. COQUERY, "Contact temperature measurements on chip  surface for reliability investigations of high power IGBT modules in traction applications", 3rd Europ. Conf. On Electronic Packaging Technology, EUPAC'98, Nuremberg, juin 1998, 9 pages.
[SHEET361] : A. HAMIDI, N. BECK, K. THOMAS, E. HERR, "Reliability and lifetime evaluation of different wire bonding technologies for high power IGBT modules", ESREF'99.
[SHEET362] : A. HAMIDI, G. COQUERY, R. LALLEMAND, "Effects of current density and chip temperature distribution on lifetime of high power IGBT modules in traction working conditions", Microelectronics and Reliability, vol. 37, no. 10-11, Oct-Nov, 1997, pp. 1755-1758.
[SHEET363] : "GTO chopper at 2000 Hz switching frequency for a DC current source 1000 A -1200V.
[SHEET364] : "Increasing frequency using GTO in gate-assisted-turn-off mode.
[SHEET365] : "Direct cooling for big GTOs. (power thyristors).
[SHEET366] : "An accurate one-dimensional model for the analysis of the turn-off performance of anode shorted GTO thyristors.
[SHEET367] : "High-power components, the GTO thyristor.
[SHEET368] : "Influence of the gate drive on avalanche process in GTO's snubberless turn-off operations.
[SHEET369] : "Influence of the impedance of the gate trigger on the maximum current turn-off capability of a GTO.
[SHEET370] : "Magnetic levitation: first similarity tests at Vitry Laboratory.
[SHEET371] : "Experimental and numerical investigations on a hard GTO turn-on process.
[SHEET372] : "Main technological causes and some mechanisms of high power GTO's failures"
[SHEET373] : "Experimental and numerical analysis of GTO's snubberless turn-off operations.
[SHEET374] : "Comparison of three 4500 V-2500 A GTO.
[SHEET375] : "Charge injection control (CIC) diodes: an original concept to improve fast power rectifiers.
[SHEET376] : "Computer-aided investigation of the turn-off performance of G.T.O. thyristors.
[SHEET377] : "SIMEDUC: an educational simulation tool for power semiconductor devices.
[SHEET378] : "Simulation of GTO thyristors turn-off",
[SHEET379] : S. DILHAIRE, S. JOREZ, A. CORNET, E. SCHAUB, W. CLAEYS, "Optical method for the measurement of the thermomechanical behavior of electronic devices", Microelectronics Reliability, no. 39, 1999, pp. 981-985.
[SHEET380] : M. Saggio, D. Fagone, S. Musumeci, "MDmeshTM: innovative technology for high voltage power MOS", ISPSD'2000.
[SHEET381] : T. REIMANN, R. KRüMMER, U. FRANKE, J. PETZOLDT, L. LORENZ, "Real time calculation of the chip temperature of power modules in PWM inverter using a 16 bit microcontroller", ISPSD'2000.
[SHEET382] : J.M. Bosc, I. Garcon, E. Huynh, P. Lance, I. Pages, J.M. Dorkel, G. Sarrabayrouse, "Reliability characterization of LDMOS transistors submitted to multiple energy discharges", ISPSD'2000.
[SHEET383] : F. Udrea, R. Ng, A. Popescu, G.A.J. Amaratunga, "Minority carrier injection across the 3D resurf junction", ISPSD'2000.
[SHEET384] : F. Heinke, R. Sittig, "The Monolithic Bidirectional Switch (MBS)", ISPSD'2000.
[SHEET385] : F.-J. Niedernostheide, H.-J. Schulze, J. Dorn, U. Kellner-Werdehausen, D. Westerholt, "Light-Triggered Thyristors with Intergrated Protection Functions", ISPSD'2000.
[SHEET386] : F. Nallet, A. Sénès, D. Planson, M.L. Locatelli, J.P. Chante, D. Renault, "Electrical and Electrothermal 2D Simulations of a 4H-SiC High Voltage Current Limiting Device for Serial Protection Applications", ISPSD'2000, pp. 287-290.
[SHEET387] : M. MARZ, P. NANCE, "Thermal Modeling of Power-electronic Systems", Application Notes, Infineon Technologies AG, Munich.
[SHEET388] : Z. KHATIR, "Nouveaux procédés d'alimentation électrique par le sol des systèmes de transports urbains", REE, no 6, juin 2000, pp. 61-67.
[SHEET389] : A. HAMIDI, R. LALLEMMAND, G. COQUERY, P. CAROFF, "Réalisation d'une alimentation isolée pour déclencheurs GTO montés en série, dans une application de très haute tension", EPF'96, pp. 205-210.
[SHEET390] : G. COQUERY, R. LALLEMAND, A. HAMIDI, D. WAGNER, "Fiabilité des modules IGBT de fortes puissances - Influence de la fatigue thermique due aux cycles de traction - Essais accélérés de cyclage thermique en puissance", EPF'96, pp. 349-354.
[SHEET391] : Z. KHATIR, "Implémentation de modèles physiques de composants de très forte puissance dans le logiciel Saber", EPF'98, pp. 143-148.
[SHEET392] : P. ALOISI, "La résistance thermique et les causes de défaillance dans les semiconducteurs de puissance", Note MOTOROLA Semiconducteurs, 1992.
[SHEET393] : H.J. SHAH, J.H. KELLY, "Effect of Dwell Time on Thermal Cycling of the Flip-Chip Joint", Proceedings International Microelectronics Symposium, pp 341-346, 1970.
[SHEET394] : S. SUMI, K. OHGA, K. SHIRAI, "Thermal fatigue failures of large scale package type power transistor modules", ISTFA Symposium, 1989, pp 309-322.
[SHEET395] : P. ALOISI, "Les boitiers des semiconducteurs de puissance : quel avenir ?", Les Clubs CRIN, La lettre Electronique de Puissance N°7, pp. 23-27, juin 1998.
[SHEET396] : C. Hager, A. Stuck, Y. Tronel, R. Zehringer, W. Fichtner, "Comparison between Finite-Element and Analytical Calculations for the Lifetime Estimation of Bond Wires in IGBT Modules", ISPSD'2000, pp. 291-294.
[SHEET397] : A. Moscatelli, A. Merlini, G. Croce, P. Galbiati, C. Contiero, "LDMOS Implementation in a 0.35 um BCD Technology (BCD6)", ISPSD'2000, pp. 323-326.
[SHEET398] : J. Onuki, Y. Chonan, T. Komiyama, M. Nihei, R. Saitou, M. Suwa, M. Kitano, "A New Void Free Soldering Process in Large-Area, High Power IGBT Modules", ISPSD'2000, pp. 367-370.
[SHEET399] : K. Hubner, M. Melehy, R. L. Biesele, "Uniform turn-on in four-layer diodes," IRE Trans. on Electron Devices, vol. ED-8, pp. 461-464, 1961.
[SHEET400] : I.M. Macintosh, "The electrical characteristics of silicon p-n-p-n triodes," Proc. IRE. vol. 46, pp. 1229-1235, june 1958.
[SHEET401] : T. Misawa, "Turn-on transient of p-n-p-n triode," J. Electronics and Control, vol. 7, pp. 523-533, 1959.
[SHEET402] : "Weibull Statistics in Short6term DIelectric Breakdown of Thin Polyethylene Films"
[SHEET403] : De Marcos, F. J. Vicandi, P. Alvarez, J. A. Cortajarena, "The economic use of clamps in flyback converters", PCIM, 07/2000. pp. 46-49.
[SHEET404] : M. FERCH, "Softmagnetic materials in todays power electronic designs", PCIM, 07/2000, pp. 50-51.
[SHEET405] : L. CHALUPA, "The new standards in high-end motor control design", PCIM, 07/2000, pp. 52-55.
[SHEET406] : [D3177], "Onduleurs de tension - Mise en oeuvre", H. FOCH, F. FOREST, T. MEYNARD, Techniques de l'Ingénieur, août 2000, 20 pages.
[SHEET407] : [D5936][D5937], "Chauffage par induction électromagnétique : technologie", G. DEVELEY, Techniques de l'Ingénieur, août 2000.
[SHEET408] : L. HINOVEANU, "Le point sur les IGBT", revue Technologie, N° 108, mai-juin 2000, pp. 65-66.
[SHEET409] : J.-C. AUGE, J. LALLEMENT, P. LYONNET, "Essais Accélérés de Composants Pneumatiques - Modélisation du Comportement et Fiabilité Prévisionnelle".
[SHEET410] : C. BRACQUEMOND, M. CHEVALIER, "Un modèle de fatigue pour les dispositifs électromécaniques".
[SHEET411] : T. CRAMER, A. WANNER, P. GRUMBSH, "Dynamic Crack Propagation in Single-Crystalline Silicon", pp. 181-186.
[SHEET412] : R.H. FOLK II, M. KHANTHA, D.P. POPE, V. VITEK, "Temperature-Dependent Onset of Yielding in Dislocation-Free Silicon: Evidence of a Brittle-to-Ductile Transistion", pp.161-167.
[SHEET413] : A. LINDEMANN, "PFC-corrected single- and three-phase rectifiers", PCIM Europe Power Electronic, no 06/2000.
[SHEET414] : R. BURKEL, L. COLOMBEL, A. VICTOR, "From the test system to the solution in the automobile", PCIM Europe Power Electronic, no 06/2000.
[SHEET415] : [D3630][D3631], "Alimentation des machines synchrones", M. LAJOIE-MAZENC, P. VIAROUGE, Techniques de l'Ingénieur, juin 1991.
[SHEET416] : [D3642], "Commande numérique - Systèmes triphasés : régime permanent", J.-P. LOUIS, C. BERGMANN, Techniques de l'Ingénieur, novembre 1996.
[SHEET417] : [D3643], "Commande numérique - Régimes intermédiaires et transitoires", J.-P. LOUIS, C. BERGMANN, Techniques de l'Ingénieur, février 1997.
[SHEET418] : [D5553], "Transports électriques urbains - Équipements de traction", Y. THURIN,  Techniques de l'Ingénieur, 19xx.
[SHEET419] : [D5502], "Traction électrique ferroviaire", V. SABATE, Techniques de l'Ingénieur, 05/1998.
[SHEET420] : J. BUILLE, "Le Moteur Universel", mémoire de 2ième année d'IUFM, 1996, 25 pages.
[SHEET421] : J.-L. CONSTANS, Y. NEAU, "Réalisation d'une maquette de Hacheur", mémoire de 2ième année d'IUFM, 1997, 56 pages.
[SHEET422] : V. LOUSTEAU, "Réalisation d'une alimentation FLY-BACK", mémoire de 2ième année d'IUFM, 1996, 30 pages.
[SHEET423] : C. CAUSSANEL, "Convertisseur continu-continu - Etude et Applications", mémoire de 2ième année d'IUFM, 1996, 36 pages.
[SHEET424] : X. PEAN, "Introduction aux alimentations à découpage", mémoire de 2ième année d'IUFM, 1996, 30 pages.
[SHEET425] : [D5500], "Traction électrique ferroviaire", F. LACOTE, M. PROVOOST, C. COURTOIS, V. SABATE, Techniques de l'Ingénieur, mai 1998.
[SHEET426] : [D5501], "Traction électrique ferroviaire", M. PROVOOST, C. COURTOIS, Techniques de l'Ingénieur, 05/1998.
[SHEET427] : [D5503], "Traction électrique ferroviaire", M. PROVOOST, Techniques de l'Ingénieur, 05/1998.
[SHEET428] : [D5504], "Traction électrique ferroviaire", V. SABATE, C. COURTOIS, M. PROVOOST, Techniques de l'Ingénieur, 05/1998.
[SHEET429] : S. LINZ, O. HEGGELBACKER, M. WOLF, "Design of UPS equipment for long hack-up times", POWER QUALITY JOURNAL, may 2000, pp. 38-40.
[SHEET430] : D.P.H. HASSELMAN, "Thermal Stress Resistance Parameters for Brittle Refractory Ceramics: a compendium", Bull. Amer. Ceram. Soc., Vol. 49, No. 12, pp. 1033-1037, 1970.
[SHEET431] : D.P.H. HASSELMAN, "Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics", J. Amer. Ceram. Soc., vol. 52, no. 11, pp. 600-607, 1969.
[SHEET432] : D.P.H. HASSELMAN, "Crack Propagation Under Constant Deformation and Thermal Stress Fracture", Int. J. Frac. Mech, vol. 7, no. 2, pp. 157-161,  1971.
[SHEET433] : D.P.H. HASSELMAN, "Thermal Stress Crack Instability and Propagation in severe thermal environments", Ceramics in Severe Environments, Proc. of the Sixth Univ. Conf. on Ceram. Sci., North Carolina State Univ. at Raleigh, December 7-9, 1970.
[SHEET434] : R. PEZZANI, E. BERNIER, A. CHRISTINE, "Evolution de la protection primaire des centraux telephoniques vers des structures silicium", Onde Electrique, vol. 73, no. 5, Sep-Oct 1993, pp. 55-60.
[SHEET435] : N.C. COULTHARD, R. PEZZANI, "POWER SEMICONDUCTOR COOLING; EVACUATING THE HEAT WHERE IT IS GENERATED", International Conference on Power Electronics and Variable-Speed Drives, may 1984, pp. 62-65.
[SHEET436] : N. COULTHARD, R. PEZZANI, "UNDERSTANDING THE GATE ASSISTED TURN-OFF OF AN INTERDIGITATED, ULTRA-FAST, ASYMMETRICAL POWER THYRISTOR (GATASCR)", PCI'81, september 1981, pp. 47-57
[SHEET437] : N. COULTHARD, R. PEZZANI, "IMPROVING THE TURN-ON OF THE GATE ASSISTED TURN-OFF ASYMMETRICAL POWER THYRISTOR (GATASCR)", PCI'82, march 1982, pp.256-257.
[SHEET438] : R. PEZZANI, "Mounting techniques of power semiconductors",  Electronique & Microelectronique Industrielles, May 1971, no. 143, pp. 57-63.
[SHEET439] : G. CHARITAT, J.-M. DILHAC, Ph. LETURCQ, E. BERNIER, R. PEZZANI, "Physical modelling of Shockley diodes used on 2/10 mu sec surge circuits", CAS'97, 20th International Semiconductor Conference, October 1997, vol. 1, pp. 113-118.
[SHEET440] : R. PEZZANI, B. MERCIER, "The DARISTOR-high speed thyristor with high commutation power", Electronique & Microelectronique Industrielles, 15 March 1972, no. 153, pp. 31-35.
[SHEET441] : J.Y. HOCHET, J.B. QUOIRIN, R. PEZZANI, "Silicon component development and experimentation for primary protection", INTELEC'93, 15th International Telecommunications Energy Conference, September 1993, vol. 2, pp. 428-432.
[SHEET442] : P. PEZZANI, E. BERNIER, C. ANCEAU, "Telephone exchange primary protection developments towards silicon structures", INTELEC 93, sept. 1993, vol. 2, pp. 421-427.
[SHEET443] : P. PEZZANI, E. BERNIER, C. ANCEAU, "Telephone exchange primary protection development towards silicon structures", L'Onde Electrique, Sept.-Oct. 1993, vol. 73, no. 5, pp. 55-60.
[SHEET444] : R. PEZZANI, "Restrictions in the use of thyristors, triacs, and power rectifiers in the field of pulse applications", L'Electricien Industriel, Dec. 1974, vol. 87, no. 2167, pp. 368-372.
[SHEET445] : R. PEZZANI, "Limits to the use of thyristors, triacs and diodes under pulsed operating conditions. II.", L'Electricien Industriel, Jan.-Feb. 1975, vol. 88, no. 2168, pp. 25-27.
[SHEET446] : N. COULTHARD, R. PEZZANI, "NEW DEVELOPMENTS IN IMPROVING THE CURRENT CARRYING CAPABILITY OF POWER SEMICONDUCTORS",  PESC'83, pp. 160-167.
[SHEET447] : R. PEZZANI, E. BERNIER, C. BALLON, "From the gas tube towards the functional integration of a Solid State protection in the Telecom Area", EPE'97.
[SHEET448] : R. PEZZANI, E. BERNIER, C. BALLON, "Une démarche d'intégration fonctionnelle et technologique : le cas des composants de protection pour réseaux téléphoniques", REE N°04, avril 1997, pp. 27-31.
[SHEET449] : P.E. NICOLLIAN, W.R. HUNTER, J.C. HU, "Experimental Evidence for Voltage Driven Break-down Models in Ultrathin Gate Oxides", IRPS'2000.
[SHEET450] : P.E. NICOLLIAN, M. RODDER, D.T. GRIDER, P. CHEN, R.M. WALLACE, S.V. HATTANGADY, "Low voltage stress-induced-leakage-current in ultrathin gate oxides", IRPS'1999.
[SHEET451] : M. SAXEMARD, "Amplificateurs de puissance",  IUFM de TOULOUSE Année 1996/97, 50 pages.
[SHEET452] : M. BRUNELLO, J.C. CRERIER, J.P. FERRIEUX, "Etat de l'art des redresseurs de courant commandés non isolés", revue 3EI, no. 18, septembre 199, pp. 66-81.
[SHEET453] : B. MULTON, H. BEN AHMED, N. BERNARD, P.-E. CAVAREC, "Les moteurs électriques pour applications de grandes séries", La revue 3E.I, N°21, juin 2000, pp. 5-18.
[SHEET454] : H. ACHTEN, L. CHAPELLIER, J.-P. LEKEUX, M. GUINET, "Le moteur universel dans le petit électroménager", La revue 3E.I, N°21, juin 2000, pp. 26-32.
[SHEET455] : [E2427], "Transistors bipolaires intégrés", J. de PONTCHARRA, Techniques de l'Ingénieur, novembre 1998.
[SHEET456] : [D2850], "Mouvement d'un fluide en présence d'un champ électrique", P. ATTEN, Technique de l'Ingénieur, novembre 1999.
[SHEET457] : M.C. BENHAHIB, B. MAZARI, C. BENACHAIBA, "New control stategy of an active power quality conditioner for harmonic compensation", UPEC2000.
[SHEET458] : S. FORSTER, T. LEQUEU, "Phénomène de surtension de gâchette à la fermeture des triacs", EPF'2000, décembre 2000, Lille, pp. 61-66.
[SHEET459] : S. FORSTER, T. LEQUEU, R. JERISIAN, A. HOFFMANN, "3-D analysis of the breakdown localized defects of ACSTM through a triac study", Microelectronics Reliability, October 2000, Vol. 40, pp. 1695-1700.
[SHEET460] : S. Dilhaire, S. Jorez, A. Cornet, L.D. Patiño Lopez, W. Claeys, "Measurement of the thermomechanical strain of electronic devices by shearography"
[SHEET461] : A. FONSECA, A.L. BUI-VAN, C. CHILLET, J.-P. YONNET, P. LANGRY, "Comparaison de deux machines à aimants permanents pour la traction électrique", Technologie, no. 109, septembre-octobre 2000, pp. 61-65.
[SHEET462] : C. FURBOCK, K. ESMARK, M. LITZENBERGER, D. POGANY, G. GROOS, R. ZELSACHER, M. STECHER, E. GORNIK, "Thermal and free carrier concentration mapping during ESD event in Smart Power ESD protection devices using an improved laser interferometric technique", ER
[SHEET463] : M. Zmeck, T. Osipowicz, F. Watt, F. Niedernostheide, H.-J. Schulze, G.B.M. Fiege, L. Balk, "Analysis of high-power devices using proton beam induced currents"
[SHEET464] : M.K. Mc Manus, J.A. Kash, S.E. Steen, S. Polonsky, J.C. Tsang, D.R. Knebel, W. Huott, "PICA: Backside failure analysis of CMOS circuits using Picosecond Imaging Circuit Analysis"
[SHEET465] : S. RAMMINGER, N. SELIGER, G. WACHUTKA, "Reliability Model for Al Wire Bonds subjected to Heel Crack Failures", ESREF'2000, pp. 1521-1526.
[SHEET466] : Richard C.Blish,II, J.Courtney Black, Ben Hui, Don T.Prince, "Technique for determining a prudent voltage stress to improve product quality and reliability"
[SHEET467] : M.H. Poech, R. Eisele, "A modelling approach to assess the creep behaviour of large-area solder joints"
[SHEET468] : D.G. YANG, L.J. ERNST, C. VAN'T HOF, M.S. KIASAT, J. BISSCHOP, J. JANSSEN, F. KUPER, Z. N. LIANG, R. SCHRAVENDEEL, G.Q. ZHANG, "Vertical die crack stresses of Flip Chip induced in major package assembly processes", ESREF'2000, pp. 1533-1538.
[SHEET469] : Janet E. Semmens, "Flip Chips and Acoustic Micro Imaging: An Overview of Past Applications, Present Status, And Roadmap for the Future"
[SHEET470] : Y. HAROEN, J. SUTANTO, "Indirect AC-AC converter 115 V, 50/60 Hz-115 V, 400 Hz with modulated accumulated energy chopper and bridge inverter by using MOSFET", PEDS'97, pp. 769-773.
[SHEET471] : R.L.A. RIBEIRO, C.B. JACOBINA, E.R.C. DA SILVA, A.M.N. LIMA, "AC/AC converter with four switch three phase structures", PESC'96, pp. 134-139.
[SHEET472] : "AC/DC/AC quasi-resonant transistor's converter for AC drive application.
[SHEET473] : "Approach to indirect protocol conversion.
[SHEET474] : "ANALYSIS OF THE REACTIVE AND PSOPHOMETRIC CURRENT OF A LINE COMMUTATED CONVERTER FOR FEEDING THE DIRECT VOLTAGE LINK OF AN INDIRECT CONVERTER.
[SHEET475] : A. BAZ, S. MORCOS, "Development and testing of a direct and an indirect wave energy converter", 1978
[SHEET476] : W. BERKAN, A. DUSZA, L. MICHALSKI, A. MICHALSKI, S. SCRAFIN, "Certain problems of smoothing reactor optimisation for DC link of indirect frequency converter", 1996.
[SHEET477] : "Indirect DC-to-DC converter for arc welding.
[SHEET478] : S. NANDI, M. SHARON, S. SAHA, V.P. SUNDERSINGH, "An AC drive system for a battery driven moped", 1995.
[SHEET479] : E.P. WIECHMANN, J.R. ESPINOZA, J.R. RODRIGUEZ, "Asynchronous bidirectional direct frequency converter controlled by space vectors", IEEE Colloquium in South America, 1990, pp. 177-183.
[SHEET480] : H.C.J. DE JONG, "Direct and indirect electrical drives (frequency converter applications)", Symposium on Electromechanics and Industrial Electronics Applied to Manufacturing Processes, september 1985, pp. 177-180.
[SHEET481] : W. LIENAU, A. MULLER-HELLMANN, H.C. SKUDELNY, "Power converters for feeding asynchronous traction motors of single-phase AC vehicles", IEEE Transactions on Industry Applications, Jan.-Feb. 1980, vol.IA-16, no.1, pp.103-&10.
[SHEET482] : "Voltage control system for the thyristor frequency converter with differential connections.
[SHEET483] : N. HAM, "Three-quadrant triacs for white goods", PCIM Europe, november 2000, page 20-28.
[SHEET484] : M. GOLDSTEIN, G. SöLKNER, E. GORNIK, "Heterodyne interferometer for the detection of electric and thermal signals in integrated circuits through the substrate", Rev. Sci. Instr. 64 (1993) 3009-3013.
[SHEET485] : H. Gossner, T. Müller-Lynch, K. Esmark, M. Stecher, "Wide range control of the sustaining voltage of ESD protection elements realized in a smart power technology", Proc. EOS/ESD Symp. (1999) 19-27.
[SHEET486] : J.A. MCCAULLEY, T.V.M. DONNELLY, M. VERNON, I. TAHA, "Temperature dependence of the near-infrared refractive index of silicon, gallium arsenide, and indium phosphid", Phys. Rev. 49 (1994) 7408-7417.
[SHEET487] : C. Fürböck, E. Gornik, M. Litzenberger, D. Pogany, "Characterization of Microelectronic Devices", http://www.iaee.tuwien.ac.at/gme/jb99/rrwien7.htm .
[SHEET488] : J.-P. HAUTIER, "causes et effets des perturbations harmoniques caractérisation et exemples", revue 3EI, no. 22, septembre 2000, pp. 30-42.
[SHEET489] : P. MORIN, "Alimentation tout terrain", Revue N° 203, Electronique Pratique, mai 1996, pp. 73-76.
[SHEET490] : E. SPAHN, K. STERZELMEIER, G. BUDERER, E. RAMEZANI, A. WELLEMAN, "Une unité de formation d'impulsions compacte basée sur l'emploi de nouveaux commutateurs semi-conducteurs et destinée à diverses applications", EPF'98, Belfort, pp. 351-355.
[SHEET491] : C. FURBOCK, M. LITZENBERGER, D. POGANY, E. GORNIK, N. SELIGER, T. MULLER-LYNCH, M. STECHER, H. GOBßNER, W. WERNER, "Laser interferometric methode for ns-time scale thermal mapping of Smart Power ESD protection devices during ESD stress", Microelectronics
[SHEET492] : D. POGANY, N. SELIGER, M. LITZENBERGER, H. GOSSNER, M. STECHER, T. MULLER-LYNCH, W. WERNER, E. GORNIK, "Damage analysis in smart-power technology electrostatic discharge (ESD) protection devices", Microelectronics Reliability, no. 39, pp. 1143-1148, 1999.
[SHEET493] : C. FURBOCK, R. THALHAMMER, M. LITZENBERGER, N. SELIGER, D. POGANY, E. GORNIK, G. WACHUTKA, "A differential backside laserprobing technique for the investigation of the lateral temperature distribution in power devices", ISPSD'99, pp. 193-196.
[SHEET494] : N. SELIGER, P. HABAS, D. POGANY, E. GORNIK, "Time-Resolved Analysis of Self-Heating in Power VDMOSFETs Using Backside Laserprobing", Solid State Electronics, Vol.41, No.9, pp.1285-1292 (1997).
[SHEET495] : [D3280], "Condensateurs utilisés en électronique de puissance", G. MOURIES, Techniques de l'Ingénieur, décembre 1995.
[SHEET496] : [D4710], "Condensateurs de puissance", C. CHANTOUCHE, Techniques de l'Ingénieur, juin 1996.
[SHEET497] : [E2060], "Condensateurs", A. LAGRANGE, Techniques de l'Ingénieur, mars 1996, 19 pages.
[SHEET498] : K.H. Edelmoser, L.L. Erhartt, F.C. Zach, "Snubber circuits for power switches in IGBT half-bridges", PCIM
[SHEET499] : Dr. Ron Hunadi, Rich Wells, "Greases with high thermal conductivity and low resistance", PCIM.
[SHEET500] : M. POECH, R. EISELE, "Modelling behaviour of large area solder joints", PCIM.
[SHEET501] : EPCOS, "Traction Capacitor", PCIM, 21 september 2000.
[SHEET502] : T.Y. KAM, C.D. LU, "Thermal stress fracture analysis of brittle bodies", Engineering fracture mechanics, vol.32, no.5, pp.827-832, 1989.
[SHEET503] : T.Y. KAM, C.D. LU, "Reliability analysis of brittle systems considering several random variables", Engineering fracture mechanics, vol.33, no.1, pp.37-44, 1989.
[SHEET504] : Y.B. XU, Y.Q. WU, X.Y. YANG, "A new mechanism of crack propagation in a single crystal silicon", Proc of the 8th inter conf on the mechanical behaviour of materials, vol. 1, pp. 279-282, 1999.
[SHEET505] : J.P. BERRY, "Some kinetic considerations of the Griffith criterion for fracture- II Equations of motion at constant deformation", J. Mech. Phys. Solids, 1960, Vol. 8, pp. 207-216.
[SHEET506] : EPRAT, "Gradateur à touches sensitives", Revue N° 200, Electronique Pratique, février 1996, pp. 73-76.
[SHEET507] : G. ISABEL, "Gradateur pour lampe halogène", Revue N° 203, Electronique Pratique, mai 1996, pp. 60-64
[SHEET508] : D. REY, "Gradateur piloté par PC", Revue N° 6, Electronique Pratique, Interfaces et développements PC, hors série, mai 2000, pp. 22-24.
[SHEET509] : H. BENOIT, "Un décodeur de télétexte CEEFAX WST", Revue numéro 521, Radio Plan Electronique, avril 1991, pp. 53-59.
[SHEET510] : M. KREMPEL, "Muzzling the interference", PCIM, no 10/2000.
[SHEET511] : G. BACHMANN, "Resonant switching in IGBT converters", PCIM, no 10/2000
[SHEET512] : J.C.H. SPENCE, Y. M. HUANG, O. SANKEY, "Lattice trapping and surface reconstruction for silicon cleavage on (111). AB-INITIO quantum molecular dynamics calculations", Acta. metall. mater. Vol. 41, No. 1O, pp. 2815-2824, 1993
[SHEET513] : J.A. HAUCH, D. HOLLAND, M.P. MARDER, H.L. SWINNEY, "Dynamic fracture in single crystal silicon", Physical Review Letters, vol. 82, pp. 3823, 1999.
[SHEET514] : J.P. SINGH, K. NIIHARA, D.P.H. HASSELMAN, "Analysis of thermal fatigue behaviour of brittle structural materials", Journal of materials  science, vol.16, pp.2789-2797, 1981.
[SHEET515] : K. FUJIMOTO, T. SHIOYA, "Elastic analysis of crack opening displacement in a fixed sided plate", JSME International Journal, vol. 30, no. 267, pp. 1383-1390, 1987.
[SHEET516] : G. COQUERY, R. LALLEMAND, "Failure criteria for long term Accelerated Power Cycling Test linked to electrical turn off SOA on IGBT module. A 4000 hours test on 1200A-3300V module with AlSiC base plate", ESREF'2000, pp. 1665-1670.
[SHEET517] : C. LAROUCI, G. VERNEAU, J.P. FERRIEUX, C. SCHAEFFER, L. GONTHIER, "Apport d'un composant à grille isolée bidirectionnel en tension dans les convertisseurs raccordés au réseau", EPF'2000.
[SHEET518] : D. VASIC, F. COSTA, E. SARRAUTE, "Commande de transistor à grille isolée par transformateur piézoélectrique", EPF'2000
[SHEET519] : P.L. CHARVET, B. DIEM, J.L. MORAND, J.B. QUOIRIN, "TETA Switch : Micro-commutateur à déclenchement pour Application Puissance", EPF'2000
[SHEET520] : A. DARTIGUES, B. GIFFARD, R. PERRET, C. SCHAEFFER, M. ROY, C. ANCEAU, "Etude statique de l'interaction puissance commande d'un composant à grille et de sa commande intégrée", EPF'2000
[SHEET521] : M. BREIL, J.L. SANCHEZ, P. AUSTIN, J.P. LAUR, J. JALADE, M. ROY, "L'IGTH : une nouvelle fonction de puissance intégrée pour une commutation à l'amorçage avec contrôle du di/dt", EPF'2000
[SHEET522] : F. GALTIE, L. GONTHIER, Y. RAINGEAUD, J. BAILLOU, "Analyse de systèmes conduisant à la conception de composants dédiés dans la filière ASDTM : Application à divers actionneurs de petite puissance", EPF'2000
[SHEET523] : D. BERGOGNE, B. ALLARD, P. BEVILACQUA, H. MOREL, "Utilisation d'un paramètre thermo-sensible de l'IGBT", EPF'2000
[SHEET524] : D. MAGNON, J. JALADE, N. NOIROT, J.C. LEBUNETEL, J.P. LAUR, "Etude de la commande d'une structure MOS-THYRISTOR permettant de satisfaire les normes CEM", EPF'2000
[SHEET525] : O. REY, W. FRIEDE, C. MASSELOT, C. SCHAEFFER, B. RIVET, A. LHORTE, J. ARNOULD, "Paramètre thermosensible pour une diode en régime d'avalanche", EPF'2000
[SHEET526] : A. SCHELLMANNS, J.C. LEBUNETEL, D. MAGNON, "Méthodes d'analyses des signaux utilisable à l'électronique de puissance", EPF'2000
[SHEET527] : M. BENSOAM, C. DULOUNG, D. LAFORE, "Un outil d'analyse de la CEM liée à la commutation en Electronique de Puissance", EPF'2000
[SHEET528] : M. COYAUD, J.P. FERRIEUX, C. SCHAEFFER, E. COLLARD, A. LHORTE, J.B. QUOIRIN, "Etude comparative de diodes rapides en Silicium et Carbure de Silicium", EPF'2000, pp. 177-181.
[SHEET529] : H. PIQUET, H. FOCH, H.E. DEMNI, "Une méthode de conception en électronique de puissance, à l'aide d'éléments caractérisés ", EPF'2000.
[SHEET530] : K. BERROUCHE, J.P. KERADEC, Y. LEMBEYE, "Jusqu'où peut-on réduire l'énergie stockée par un convertisseur AC-DC à absorption sinusoïdale ?", EPF'2000
[SHEET531] : Z. KHATIR, S. LEFEBVRE, "Analyse thermo-mécanique de composants semi-conducteur de puissance à l'aide des éléments de frontière", EPF'2000
[SHEET532] : F. RICHARDEAU, F. FOREST, "Problématiques, méthodologies et enjeux de la fiabilité en électronique de puissance", EPF'2000, pp. 353-358.
[SHEET533] : G. COQUERY, R. LALLEMAND, "Durée de vie des modules IGBT pour la traction ferroviaire. Apport de la technologie AlSiC. Critères de défaillance, méthodologie, normalisation", EPF'2000, 4 pages.
[SHEET534] : T. NOVAK, "Liaison à courant continu Haute Tension", dossier de l'ENS de Cachan, 1991.
[SHEET535] : P. JACOB, M. HELD, P. SCACCO, "IGBT Power Semiconductor Reliability Analysis for Traction Application", IPFA'95, Singapore, pp. 169-175
[SHEET536] : Bruno Delmas, "Le sans-plomb", Revue Technologie, N° 144, mai-juin 2006, pp. 54-59.
[SHEET537] : Technologie, "Infos - Vive le vent, vive le vent ...", Revue Technologie, N° 144, mai-juin 2006, pp. 78-79.
[SHEET538] : Dr. J.-S. LAI, "A High-Efficiency Low-Cost DC-DC Converter for SOFC - Performance and Control of V6 Converter", SECA Core Technology Program Review Meeting, May 11-13, 2006, 39 pages.
[SHEET539] : F. FOREST, J.-J. HUSELSTEIN, T. MEYNARD, V. COSTAN, E. SARRAUTE, E. LABOURE, A. CUNIERE, "Optimisation du système d'alimentation dans les convertisseurs Parallèles entrelacés utilisant des transformateurs de couplage", EPF'2006, Grenoble, 5-6 juillet 2006
[SHEET540] : B. VALLET, Y. LEMBEYE, J.-P. FERRIEUX, "Etude de l’intégration d’une structure à transfert d’énergie mixte", EPF'2006, Grenoble, 5-6 juillet 2006, 5 pages.
[SHEET541] : E. MINAZARA, D. VASIC, F. COSTA, "Amélioration des performances d'un transformateur piézoélectrique par l'usage d'une charge non linéaire", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET542] : W. LAJNEF, J.-M. ViNASSA, O. BRIAT, E. WOIRGARD, "Cyclage de super-condensateurs utilisant des profils en courant impulsionnels", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET543] : E. DE JAEGER, B. FRANCOIS, B. ROBYNS, "Apport de l'électronique de puissance à la production d'énergie électrique d'origine éolienne - Expérience belge", EPF'2006, Grenoble, 5-6 juillet 2006, 9 pages.
[SHEET544] : M. URBAIN, S. RAEL, B. DAVAT, P. DESPREZ, "Réalisation d’une batterie virtuelle", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET545] : Y. PANKOW, P. LE MOIGNE, "Alimentation Sans Interruption à Pile à Combustible associée à des Supercondensateurs", EPF'2006, Grenoble, 5-6 juillet 2006, 7 pages.
[SHEET546] : V.B. DANG, Y. LEMBEYE, J.-P. FERRIEUX, J. BARBAROUX, "Optimisation de l’interface d’électronique de puissance pour Pile à Combustible", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET547] : V. BOITIER, A. SIMON MUELA, C. ALONSO, "Caractérisation d’une éolienne de petite puissance. Application à une prévision de la production", EPF'2006, Grenoble, 5-6 juillet 2006, 5 pages.
[SHEET548] : A. RUFER, S. LEMOFOUET, "Stockage d’énergie par air comprimé: un défi pour les circuits d’électronique de puissance", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET549] : D. CHATROUX, S. MERCIER, S. BACHA, P. PERICHON, H. COLIN, A. LABRUNIE, Y. LAUSEMAZ, "Spécificités de l’électronique de puissance pour le photovoltaïque connecté au réseau", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET550] : C. BLANC, A. RUFER, "Modélisation d’un système de stockage de type électrolyseur réversible au vanadium", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET551] : A. NARJISS, D. DEPERNET, F. GUSTIN, D. HISSEL, A. BERTHON, "Convertisseur « BT/HT » à transformateur pour couplage d’une pile à combustible à un bus continu", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET552] : J.-M. JARROUSSE, E. LABOURE, F. COSTA, P. THOMAS, "Commande à récupération de charge pour une alimentation résonnante 3MHz", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET553] : E. SARRAUTE, T. MEYNARD, V. COSTAN, E. LABOURE, A. CUNIERE, F. FOREST, J.-J. HUSELSTEIN, "Analyse de différents montages d’inductances couplées dans les convertisseurs DC/DC parallèles entrelacés", EPF'2006, Grenoble, 5-6 juillet 2006, 6 pages.
[SHEET554] : J.M. TARASCON, "Stockage de l’énergie via les batteries : quelle chimie, quel futur ?", Ecole polytechnique, Amphi. Becquerel, 7 Décembre 2015, 49 pages.
[SHEET555] : B. MULTON, H. BEN AHMED, "Le stockage stationnaire d'énergie électrique: pourquoi et comment ?", La revue 3E.I, N°48, mars 2007, pp. 6-17.
[SHEET556] : M. BROUSSELY, "Les accumulateurs au Lithium-ion, état de l'art", La revue 3E.I, N°48, mars 2007, pp. 36-45.
[SHEET557] : C. LAROUCI, G. FELD, "Simulateur à base d'actionneurs électriques pour la chaîne de transmission automobile", La revue 3E.I, N°48, mars 2007, pp. 36-45.
[SHEET558] : H. RICA, F. NARCY, "LED blanches et conversion DC-DC - 2ÈME partie", La revue 3E.I, N°48, mars 2007, pp. 69-78.
[SHEET559] : E. FELICE, P.Y. OREAL, " Vers un avion tout électrique ", Revue Technologie, N° 149, avril 2007.
[SHEET560] : S. GASTON, B. HUE, S. LECORRE, "Le kart prend de la hauteur en EDPI", Revue Technologie, N° 149, avril 2007, pp. 38-46.
[SHEET561] : F. NARCY, "LED blanches et conversion DC-DC - 1ere partie", La revue 3E.I, N°47, décembre 2006, pp. 40-50.
[SHEET562] : P. GOOSSENS, "Commande de moteur asynchrone avec SMP et AVR", Revue ELEKTOR, N° 347, mai 2007, pp. 44-48.
[SHEET563] : S. WEST, P.T. KREIN ,"Equalization of Valve-Regulated Lead-Acid Batteries: Issues and Life Test Results", IEEE, 2000, pp. 439-446
[SHEET564] : C. LAROUCI, J.-P. FERRIEUX, L. GERBAUD, J. ROUDET, "Optimisation of the volume of a PFC Flyback structure under EMC and loss constraints", EPE'2001, 9 pages.
[SHEET565] : E. HAUG, "Vitamines pour LED - Circuits de pilotage pour LED haute puissance", Revue ELEKTOR, N° 347, mai 2007, pp. 50-54.
[SHEET566] : A. ZOUINKHI, B. REBHI, M. ELLEUCH, "Banc d'essais des perturbations dans les réseaux industriels", Electrotechnique du futur 2001,  novembre 2001, pp. 83-88.
[SHEET567] : P. SIMON, P.-L. TABERNA, C. PORTET, "Les supercondensateurs", La revue 3E.I, N°49, juin 2007, pp. 8-14.
[SHEET568] : E. HOANG, G. FELD, B. REVOL, D. PENARD, "Eléments d'étude d'un système de stockage de l'énergie électrique : le supercondensateur", La revue 3E.I, N°49, juin 2007, pp. 15-21.
[SHEET569] : M. GUILLET, J.-C. GUIGNARD, J.-C. SCHUBENEL, "Comprendre les harmoniques et leurs effets", La revue 3E.I, N°49, juin 2007, pp. 15-21.
[SHEET570] : B. MULTON, J. RUER, "Stocker l'énergie: oui, c'est indispensable et c'est possible ! Pourquoi ? Où ? Comment ? ", Publication du club ECRIN, http://www.ecrin.asso.fr, 29 pages.
[SHEET571] : B. MULTON, "Stockage de l'énergie électrique pour la production décentralisée d'électricité (connectée au réseau ou en site isolé)", diaporama de Master téléchargeable sur http://e-mecatronique.bretagne.ens-cachan.fr/file.php/35/DocPedagogiques//M2R_Stock
[SHEET572] : C.R. AKLI, X.ROBOAM, B. SARENI, A. JEUNESSE, "Energy management and sizing of a hybrid locomotive", EPE'2007, Danemark, 3-5 september 2007, 10 pages.
[SHEET573] : F. GIRAUD, Z.M. SALAMEH, "Steady-State Performance of a Grid-Connected Rooftop Hybrid Wind-Photovoltaic Power System with Battery Storage", IEEE Transactions on Energy Conversion, Vol. 16, No. 1, March 2001, pp. 1-7.
[SHEET574] : K. AGBOSSOU, M. KOLHE, J. HAMELIN, T.K. BOSE, "Performance of a Stand-Alone Renewable Energy System Based on Energy Storage as Hydrogen", IEEE Transactions on Energy Conversion, Vol. 19, No. 3, September 2004, pp. 633-640.
[SHEET575] : F. VALENCIAGA, P.F. PULESTON, "Supervisor Control for a Stand-Alone Hybrid Generation System Using Wind and Photovoltaic Energy", IEEE Transactions on Energy Conversion, Vol. 20, No 2, June 2005, pp. 398-405.
[SHEET576] : O. MICIC, "Afficheur pour alimentation DC", revue ELEKTOR, N° 355, janvier 2008, pp. 34-39.
[SHEET577] : J. FELL, "2,8 l aux 100 km sur Toyota Prius ", revue ELEKTOR, N° 355, janvier 2008, pp. 74-77.
[SHEET578] : A DELMAS, E. FELICE, "L’électrotechnique se met au vert", Revue Technologie, N° 151, septembre-octobre 2007, pp. 70-78.
[SHEET579] : O. SIDLER, "Rénovation à basse consommation des logements en France", ENERTECH, Ingénierie énergétique et fluides, août 2007, 81 pages.
[SHEET580] : M. HARFMAN-TODOROVIC, L. PALMA, M. CHELLAPPAN, P. ENJETI, "Design Considerations for Fuel Cell Powered UPS", 2008, pp. 1984-1990.
[SHEET581] : X. ZHU, D. XU, P. WU, G. SHEN, P. CHEN, "Energy Management Design for a 5kW Fuel Cell Distributed Power System", 2008, pp. 291-297.
[SHEET582] : J.-P. CHASSAING, "Un état des lieux national de la filière électrotechnique", Revue Technologie, N° 154, mars 2008, pp.62-65.
[SHEET583] : J.-P. CHASSAING, "1er challenge ÉducÉco : La piste de l’écomobilité", Revue Technologie, N° 163, septembre-octobre 2009, pp. 60-63.
[SHEET584] : S. SOLEILHAVOUP, "La gestion de flotte de véhicules par GPS et GSM (première partie)", Revue Technologie, N° 165, janvier-février 2010, pp. 52-59.
[SHEET585] : S. SOLEILHAVOUP, "La gestion de flotte de véhicules par GPS et GSM (seconde partie)", Revue Technologie, N° 166, mars 2010, pp. 52-65.
[SHEET586] : P. LESERF, "Réseaux embarqués pour l'automobile - Application aux systèmes de commande électrique", La revue 3E.I, N°60, mars 2010, pp 38-41.
[SHEET587] : F. GIRAUD, J-F. SERGENT, M AMBERG, Y. LE MENACH, "Initiation à la conversion d'énergie électrique: exemple sur un micro-système de production photovoltaique", La revue 3E.I, N°60, mars 2010, pp 51-55.
[SHEET588] : C. SERMONDADE, "Mise en oeuvre de régulateurs industriels", La revue 3E.I, N°60, mars 2010, pp 56-59.
[SHEET589] : V. FICHET, "Histoire des sciences - La guerre des courants", La revue 3E.I, N°60, mars 2010, pp 78-80.
[SHEET590] : M. KIEL, "Chargeur solaire portable pour randonneurs", ELEKTOR, revue N° 379, janvier 2010, pp. 20-25.
[SHEET591] : GIMELEC, "Le Motion control - Intelligence et performance au coeur des machines", Revue Technologie, N° 168, mai-juin 2010, pp. 20-25.
[SHEET592] : G. CANIOT, S. PIETRANICO, "Présentation des connaissances de base en thermique des composants", La revue 3E.I, N°61, juin 2010, pp. 7-14.
[SHEET593] : V. DEBUSSCHERE, B. MULTON, H. BEN AHMED, "Eco-conception  : de nouveaux critères de conception en électrotechnique pour le développement durable", La revue 3E.I, N°61, juin 2010, pp. 37-47.
[SHEET594] : D.A. NOTTER, M. GAUCH, R. WIDMER, P. WAGER, A. STAMP, R. ZAH, H.J. ALTHAUS, "Contribution of Li-Ion Batteries to the Environmental Impact of Electric Vehicles", Environmental Science & Technology, 9 August 2010, DOI: 10.1021/es903729a
[SHEET595] : C. TAVERNIER, "Désulfateur pour batterie de voiture", revue ELEKTOR N° 373/374, juillet/août 2009, pp. 45-46.
[SHEET596] : [D3278], "Apport de l’électronique de puissance pour la traction électrique", M. DEBRUYNE, Techniques de l'Ingénieur, août 2010, 18 pages.
[SHEET597] : [AF6612], "Batteries Li-ion - Conception théorique", M.-L. DOUBLET, Techniques de l'Ingénieur, janvier 2009, 14 pages.
[SHEET598] : C. WU, "Better Batteries for Electric Vehicles", MRS BULLETIN, VOLUME 35, SEPTEMBER 2010, pp. 650-651.
[SHEET599] : T. BOEKEN, T. DESCHAMPS, "Batteries du futur pour véhicules électriques", http://www.bulletins-electroniques.com, 1er octobre 2010, 32 pages.
[SHEET600] : D. GUYOMARD, "La technologie des batteries au lithium", Carrefour in’énergie, le 27 octobre 2010, 26 pages.
[SHEET601] : J. RIOT, "Internet mode d’emploi - Les moteurs de recherche", Revue Technologie, N° 168, mai-juin 2010, pp. 16-19.
[SHEET602] : J. RIOT, "Internet mode d’emploi - En quête de la bonne requête", Revue Technologie, N° 169, septembre-octobre 2010, pp. 16-20.
[SHEET603] : C. BENBOUJEMA, A. SCHELLMANNS, L. VENTURA, T. LEQUEU, "Improvement of a bidirectional field effect transistor (FET) switch with less loss", Industrial Electronics, ISIE 2009, IEEE International Symposium on, 5-8 July 2009, pp. 2001-2005.
[SHEET604] : H. NASSER, N. K. M’SIRDI, A. NAAMANE, "Modelisation et simulation dynamique d'un kart électrique", MOSIM’10, 10-12 mai 2010, 7 pages.
[SHEET605] : J.-M. GIRAUDON, P. DE KERVASDOUE, F. KUHN, P. LANDEAU, M. PAILLET, P. ROSE, J. SOUFFLOT, T. DE VALROGER, X. VIGNAL, "Identification et authentification à l'ère numérique - Enjeux et approches méthodologiques", FEDISA, Novembre 2009, 57 pages.
[SHEET606] : L. HIRSINGER, B. MULTON, "Problème de la motorisation d'un véhicule électrique - Première partie"", La revue 3E.I, N°4, décembre 1995, pp. 53-64.
[SHEET607] : L. HIRSINGER, B. MULTON, "Problème de la motorisation d'un véhicule électrique - Seconde partie"", La revue 3E.I, N°5, mars 1996, pp. 55-64.
[SHEET608] : M. TIMOFEEVA, G. ALLEGRE, S. FLAMENT, D. ROBBES, "Des lois de l'induction aux théorèmes de Thévenin et de Norton", J3eA No. 9, 2010, 6 pages.
[SHEET609] : [BM4640], "Éoliennes", M. RAPIN, P. LECONTE, Techniques de l'Ingénieur, août 2009, 25 pages.
[SHEET610] : [IN203], "Nouvelles générations de batteries des véhicules électriques et hybrides", S. MARTINET, Techniques de l'Ingénieur, mai 2012, 17 pages.
[SHEET611] : F. NOUREDDINE, "Une expérience pédagogique autour d’un robot industriel", J3eA No. 12, 2013, 17 pages.
[SHEET612] : L. DE VROEY, F. VRINS, F. LABRIQUE, C. TRULLEMANS, C. EUGENE, D. GRENIER, "Apprentissage par projet en électricité : exemple et mise en oeuvre", J3eA No. 5, 2006, 23 pages.
[SHEET613] : S. VIOLLIN, "Le vélo à assistance électrique", les cahiers de l’instrumentation N°9, Chauvin Arnoux, octobre 2010, pp 2-5.
[SHEET614] : J.-P. CHASSAING, P. LEFORT, "La mesure au coeur du Challenge EducEco", les cahiers de l’instrumentation N°12, Chauvin Arnoux, novembre 2013, pp 20-27.
[SHEET615] : A. SIVERT, F. BETIN, "Véhicule électrique à faible consommation : éco-marathon (système pluri-technologique et embarqué)", Revue 3E.I, N°78, Octobre 2014, pp. 9-22.
[SHEET616] : A. SIVERT, F. BETIN, "Réalisation d’un kart électrique : Etude, choix technologique, instrumentation embarquée, caractérisation", Revue 3E.I, N°78, Octobre 2014, pp. 23-32.
[SHEET617] : A. SAMBA, N. OMAR, H. GUALOUS, P.V.D. BOSSCHE, J.V. MIERLO, "Modélisation Electrothermique 2D d’une batterie lithium-ion de type « pouch", Revue 3E.I, N°78, Octobre 2014, pp. 84-88.
[SHEET618] : B. MULTON, L. HIRSINGER, "Problème de la motorisation d'un véhicule électrique", Journées de la section électrotechnique du club EEA 1994, Mars 1994, CACHAN, France, 22 pages.
[SHEET619] : [AF5101], "Bases de la dynamique du véhicule - État stationnaire, stabilité et régime transitoire des mouvements de lacet-dérive et de roulis", L. MAIFFREDY, Techniques de l'Ingénieur, juillet 2012, 35 pages.
[SHEET620] : A. SIVERT, F. BETIN, T. LEQUEU, B. VACOSSIN, "Optimisation de la masse d’un véhicule électrique à faible consommation (vélo, vélo-mobile, voiture électrique).", Revue 3E.I, N°80, Avril 2015, pp. 47-56.
[SHEET621] : A. SIVERT, F. BETIN, T. LEQUEU, "Instrumentation d’un véhicule motorisé électrique faible consommation de type « éco marathon »", Revue 3E.I, N°81, Juillet 2015, pp. 52-60.
[SHEET622] : A. SIVERT, F. BETIN, T. LEQUEU, F. MAEGHT, "Pedagogical study of electric go-karts: Technological choices, instrumentations, characteristics, challenge", WSEAS TRANSACTIONS ON ADVANCES IN ENGINEERING EDUCATION, Vol. 12, 2015, pp. 54-65.
[SHEET623] : A. SIVERT, F. BETIN, B. VACOSSIN, T. LEQUEU, M. BOSSON, "Optimization of the mass for a low-power electric vehicle and consumption estimator (e-bike, e-velomobile and e-car)", WSEAS TRANSACTIONS ON ADVANCES IN ENGINEERING EDUCATION, Vol. 12, 2015, pp. 105
[SHEET624] : A. SIVERT, F. BETIN, B. VACOSSIN, M. BOSSON, T. LEQUEU, "Etat de santé, diagnostic, durée de vie des batteries Lithium – Application à l’estimation de l’autonomie d’un véhicule électrique", Revue 3E.I, N°84, Avril 2016, pp. 31-41.
[SHEET625] : T. LEQUEU, "Association e-Kart – Comment construire un véhicule électrique", Journée 3E.I, 30 juin 2016, 45 pages.
[SHEET626] : A. SIVERT, F. BETIN, B. VACOSSIN, J. AUBRY, T. LEQUEU, "Différentes Stratégies de pilotages pour Véhicule Electrique Optimisation : puissance moteur, énergie véhicule, temps...", Revue 3E.I, N°86, Octobre 2016, pp. 25-33.
[SHEET627] : T. LEQUEU, V. DEWANCKER, S. JACQUES, A. SIVERT, "Réalisation d’un kart électrique : solutions pour faire évoluer le projet", Revue 3E.I, N°86, Octobre 2016, pp. 34-43.
[SHEET628] : A. SIVERT, F. BETIN, B. VACOSSIN, M. BOSSON, T. LEQUEU, "Capacité énergétique, diagnostic, durée de vie de batterie Lithium : application à l'estimation de l'autonomie d'un véhicule électrique", SGE 2016, 7 pages.
[SHEET629] : G. BEAUGENDRE, F. VINCENT, M. BERRANGER, "Géolocalisation en Intérieur par Ultrasons", J3eA, Volume 14, 2015, Colloque d'enseignement des technologies et des sciences de l'information et des systèmes, CETSIS 2014, 5 pages.
[SHEET630] : F. VINCENT, B. MOUTON, C. NOUALS, "Contrôle d'un kart électrique à 2 moteurs indépendants", CETSIS 2008, Bruxelles.
[SHEET631] : S. JACQUES, T. LEQUEU, V. DEWANCKER, "Une initiative pédagogique autour du kart électrique : le projet collectif intensif", J3eA 15, 0007 (2016), 23 pages.
[SHEET632] : A. SIVERT, B. VACOSSIN, F. BETIN, N. DAMAY, "Batteries de smartphone (applications, diagnostic)", Revue 3E.I, N°86, Octobre 2016, pp. 44-52.
[SHEET633] : BOSCH, "Thermal Challenges at 22kW Wireless Charging", IQPC: Thermal Management for EV/HEV, 14-16 February, 2017, Germany, 16 pages.
[SHEET634] : A. SIVERT, F. BETIN, B. VACOSSIN, T. LEQUEU, "Limitation thermique et paramétrage d'un moto-variateur pour véhicule électrique", Revue 3E.I, N°87, Janvier 2017, pp. 36-45.
[SHEET635] : A. SIVERT, B. VACOSSIN, S. CARRIERE, F. BETIN, "Convertisseur, régulateur de LED blanche de 10 à 100W", Revue 3E.I, N°85, Juillet 2016, pp. 37-47.
[SHEET636] : A. SIVERT, B. CAUQUIL, B. VACOSSIN, S. CARRIERE, F. BETIN, "Véhicules à faible consommation énergétique (exemple du challenge SUNTRIP)", Revue 3E.I, N°85, Juillet 2016, pp. 48-56.
[SHEET637] : V. SCHWARZ, B. GINDROZ, "LE STOCKAGE ELECTROCHIMIQUE", MINES-ENERGIE, Dossier Stockage de l’Energie, Janvier-Février 2005, 7 pages.
[SHEET638] : D. CHATROUX, "Accumulateurs Lithium-ion et véhicules électriques", Symposium de Genie Electrique, Juin 2016, Grenoble, France, , 8 pages.
[SHEET639] : A. SIVERT, F. BETIN, B. VACOSSIN, T. LEQUEU, "Convertisseur pour DEL alimenté par batterie (3W à 20W)", Revue 3E.I, N°88, Avril 2017, pp. 30-40.
[SHEET640] : Techniques de l'Ingenieur, "La batterie lithium-ion reine du stockage d'énergie", Cahier technique IT N° 995, février 2017, pp. 49-55.
[SHEET641] : J. TREINER, "Stockage de l'énergie : comment le dimensionner ?", Les Focus, Techniques de l'Ingenieur, mars 2017, 12 pages.
[SHEET642] : A. SIVERT, V. BOITIER, A. FAQIR, F. BETIN, T.LEQUEU, "Trottinettes électriques : instrumentation, modélisation, simulation et contrôle sous Arduino", La revue 3E.I, N°91, Janvier 2018, pp. 56-68.
[SHEET643] : S. JACQUES, "A Pedagogical Intensive Collaborative Electric Go-Kart Project", iJEP 2017, Vol. 7, No 4, pp. 117-134.

Copyright - [Précédente][Suivante] - Home

Mise à jour le lundi 29 octobre 2018 à 11 h 38 - E-mail : thierry.lequeu@gmail.com
Cette page a été produite par le programme TXT2HTM.EXE, version 10.7.2 du 22 mars 2015.

Copyright 2018 : TOP

Les informations contenues dans cette page sont à usage strict de Thierry LEQUEU et ne doivent être utilisées ou copiées par un tiers.
Powered by www.google.fr, www.e-kart.fr, l'atelier d'Aurélie - Coiffure mixte et barbier, La Boutique Kit Master Shop and www.lequeu.fr.